Characteristics and typical fi elds of application Austenitic stainless rutile fl ux-cored wire of T 23 12 2 L P / E309LMoT1 type. The corrosion resistance is superior to T 19 12 3 L / E316L type fi llers. Primarily designed for welding dissimilar joints between stainless steels and low-alloyed steels. It can also be used for overlay welding, providing an 18Cr-8Ni-2Mo deposit from the very fi rst layer. The fast freezing slag offers excellent weldability and slag control in all positions. Easy handling and high deposition rate result in high productivity with excellent welding performance and very low spatter formation. Increased travel speeds as well as self-releasing slag with little demand for cleaning and pickling provide considerable savings in time and money. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Provides high resistance to hot cracking even at high dilution. Alloying with molybdenum increases the corrosion resistance and weld metal strength. Suitable for service temperatures from –60ºC to 300ºC. For fl at and horizontal welding positions, BÖHLER CN 23/12 Mo-FD may be preferred. Ferrite measured with FeritScope FMP30 15 – 23 FN.