Form: Needle valve
Model: SAS2050-01
Brand: Sanhe/sanwo
Connection form: thread
Maximum working pressure: 1.0Mpa
Drive mode: manual
Environmental fluid temperature: 5-60 degrees
Adjust flow speed: 14 revolutions
Standard: National standard type (channel position): straight-through throttle valve
The shape of the opening and closing parts: needle-shaped throttle
Nominal diameter: 10 (mm) mm
Material: aluminum alloy
Working temperature: normal temperature
Pressure environment: normal pressure
Flow direction: two-way
Flow adjustment range: 0~1.0Mpa
Parts and accessories: valve body
SANWO Check Valve SAS2050-01
People who bought this item also viewed
SMC Proportional Valve ITV2051-31F2BL4
Jeou Gang Overflow Valve MRV-04-A-3-A
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
TYCO Relay V23003H 25F104
ARK Air Cylinder KADN40-50-I-P-A
Recent related posts
-
08/14/2020
Common problems and solutions of liquid refrigerants in refrigeration systems
1. Migration of liquid refrigerant<br></br> refrigerant migration refers to the accumulation of liquid refrigerant in the compressor crankcase when the compressor is stopped.
-
08/15/2020
Simple treatment method after the refrigeration system enters water
Since the chiller has a water system, there is a possibility that the refrigerant system may enter water when it is used improperly. Therefore, a process guide is formulated for the problem of water ingress
-
11/10/2021
Application of HMI in PLC Based Industrial Control System
Programmable logic controller (PLC) plays an important role in factory automation (FA). The continuous development of technology has greatly promoted the improvement of control function and control level of the control system based on PLC
-
06/29/2020
Introduction of measures for compressor pressure protection
Introduction of measures for compressor pressure protection Measures for compressor pressure protection include the following: 1. Control of suction and exhaust pressure When the compressor is running, due to the system or the compressor itself, the discharge pressure may be too high or the suction pressure may be too low. For this reason, the suction and discharge pressures need to be controlled.
-
09/14/2020
The exhaust temperature of the unit is high (over 100℃)
The lubricating oil level of the unit is too low (the green position should be visible from the oil level mirror);
-
06/21/2020
Working principle of sliding vane compressor_Features of sliding vane compressor
Working principle of sliding vane compressor <img src="{{media url="magefan_blog/Working_principle_of_scroll_compressor_Characteristics_of_scroll_compressor.jpg"}}" alt="" /> Air is sucked in through a filter and a regulating proportional valve. The regulating valve is mainly used to regulate the pressure chamber formed by the rotor and slide of the air cylinder. The rotor rotates eccentrically with respect to the cylinder, the valve plate is installed in the rotor groove, and the slider is pushed to the cylinder wall by centrifugal force.
-
09/11/2023
Air to Water Heat Pump Systems: An Efficient and Sustainable Solution for Home Heating and Cooling
As society becomes increasingly concerned with sustainability and energy efficiency, more and more homeowners are turning to air to water heat pump systems as a way to heat and cool their homes.
-
09/04/2023
Ducted vs Ductless Heat Pump: Which One is Right for You?
When it comes to heating and cooling your home, there are many options available. Two popular choices are ducted and ductless heat pumps.
-
06/14/2020
This is one machine with multiple libraries, do you understand?
This is one machine with multiple libraries, do you understand? The owner replaced a new air conditioner, the master installed it in less than half an hour, and the air conditioner was evacuated in 5 minutes. Is this newly installed air conditioner reall 器2 䀀 ᅵ皥 䖒皦즠Ʋ煔क़ 㲈Ʋ 䌁皦 ᮔDž༬皧煞क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V / 펔B䌁皦 ᮔDž '鱤džၜ먢䇨珵呈ᠾ뤂ᐱ ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲ ᠾ 랖僧 識 �僬㣢ᐲ 臆S㥲ᐲ ᬄğ 識 理艏S杴 識杴 㥲ᐲ
-
07/10/2020
Structure and principle of screw air compressor
Structure and principle of screw air compressor 1.Basic Structure Generally, what we call a screw compressor refers to a twin screw compressor, and its basic structure is shown in the figure above. A group of interlocking spiral rotors are arranged in parallel in the main machine of the compressor.