CHELIC Pneumatic Equipment Air Cylinder JTD25*60
Type: Air Cylinder
Brand: Chelic
Type: Air Cylinder
Brand: Chelic
Type: Air Cylinder
Brand: Chelic
CHELIC Air Cylinder JDAD80*100-B
CHELIC Air Cylinder MSL10*10
CHELIC Air Cylinder FMR16*50
Festo Air Cylinder CRDSNU-20-25-P-A
AirTAC Air Cylinder TACQ32X20
Festo Air Cylinder ADN-20-60-A-P-A
Festo Air Cylinder SLT-20-50-P-A
HENGSTLER Encoder RI58-D/1000AF.47TB
Belimo Actuator FSLF24-S
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
CCS Switch 605G5
YUKEN Vane Pump PV2R12-10-65-F-REAA-41
Keyence Sensor ET-1518
KRACHT Overflow Valve DBD10R1A125
06/30/2020
Broken suction valve of Bristol compressor A Bristol compressor is a machine that compresses gas. Generally, the piston compresses gas 1450 times per minute (half-sealed compressor) or 2900 times (full-sealed compressor), that is, the time to complete an intake or exhaust process is 0.02 seconds or even shorter.
07/20/2020
1. The heavy hammer starter, the part that is easily damaged is the poor contact of the start contact. During the measurement, the weight starter can be removed and measured with a multimeter ohm block according to the original installation direction.
03/07/2021
For signal line and encoder input line, please use shielded wire. Wiring length: the length of signal line from NC to AC servo driver is less than 3m, and the length of input line from AC driver to encoder is less than 20m. The ground wire should be thick wire as far as possible. According to the third grounding standard (grounding resistance < 100 Ω), one point grounding method should be adopted to connect the ground wire. If the motor and the machine tool are insulated, the motor should be grounded.
09/15/2020
I repaired a main engine with locked rotor in the early stage. It is an EP200 model produced by Ingersoll Rand in 1997. Before I repaired it, Ingersoll Rand itself could not repair it. Because the main engine was severely deformed and the rotor and cavity Severe body adhesion.
09/20/2020
Shanghai ABB Motor's okmarts.com's ABB motor storage-type spot supplier, was established on Chengdu Airport Road, highway, canal and airport to the whole country. The company has a high-quality, skilled and dedicated team of 30 people.
08/16/2020
With the progress of society and the development of all walks of life, the installation of large and small cold storage has gradually risen and spread quickly across the country.
09/05/2020
Single-screw and twin-screw manufacturing process of twin-screw is more complicated than single-screw in terms of structure, and the difference in service life and working efficiency is not very big,
06/14/2020
BRAZIL: Compressor manufacturer Embraco will host two free educational webinars in June, one covering refrigeration fundamentals, the other on the use of flammable “natural” refrigerants in commercial refrigeration.
06/17/2022
Variable Frequency Drive (VFD) can be classified according to the following generic topologies
09/09/2020
1.Compressor power and pressure: 1. The shaft power of the compressor is the sum of the indicated power and the friction power. The indicated power is the power directly consumed by compressed gas, the friction power is the power consumed by overcoming mechanical friction, and the shaft power of the compressor is the power used to select the drive motor.