Product Display
Product Description |
Parameter |
||
Brand: |
GMCC |
Voltage: |
115-120V 60Hz |
Refrigerant: |
R410a |
230W, LRA 15. 2A |
|
Model: |
PA215M2C-4FT |
refrigerante R134a |
|
Origin: |
China |
AP 1.67 MPa, DP 1.67 MPa, SP 5.0 MPa |
|
Specifications: |
Brand new |
SPU25X126AQSB |
|
Type: |
Refrigeration compressor |
250 VAC 12Mf |
|
Application range: |
Refrigeration parts |
Peso 4.8 kg |
|
Material: |
Stainless steel |
|
|
Product Media
Installation Process
1. Check whether the refrigerating oil of the original compressor is too dirty. If the oil is too dirty, the system must be cleaned with nitrogen and the dry filter must be replaced.
2. Check whether the contacts of the compressor operation control AC contactor are stuck or have poor contact, causing the compressor to run out of phase. If the compressor is damaged in the coil winding, the AC contactor of the same model must be replaced.
3. Check and protect the circuit. The high and low pressure switch is in the closed state in the normal refrigerant compression state, the high pressure limit is less than or equal to 2.2Mpa, and the low pressure is more than or equal to 0.28Mpa.
4. Check whether the radiator is too dirty and must be cleaned.
5. Check whether the original equipment has refrigerant pressure, and repair it if the refrigerant is leaking.
1. Disconnect the power supply.
2. Disassemble the compressor and check its old compressor.
3. Nitrogen cleaning system, steps, disassemble the filter and blow in nitrogen from the inlet of the radiator, discharge from the outlet of the radiator, then blow in from the inlet of the filter, release from the return pipe of the compressor, and repeat cleaning several times.
4. Install the new compressor and weld the new filter.
5. Use nitrogen to pressure, 2.0Mpa pressure for leak detection for 30 minutes.
6. Circuit check and replace damaged parts, check power supply and control circuit.
7. Clean the radiator.
8. Vent the nitrogen and evacuate for 30 minutes.
9. Add the same type of refrigerant
10. Power-on debugging, check the compressor current and voltage, the normal pressure of the refrigerant, high pressure 1.7Mpa, low pressure 0.45Mpa, the refrigerant charge is expected to be 0.7kg/hp (10-30hp).
Packing & Shipping
Q: What means of transportation?
A: It can be shipped by air to the nearest international airport or by courier like DHL, TNT to your address; if it's not urgently required, they can also be shipped by sea to the nearest sea port.
Q: How long is your delivery time?
A: Usually, if it is in stock, it will take 5 to 10 days. Or, if there is no stock, it is 15-20 days, depending on the quantity.
GMCC is a large-scale Sino-Japanese joint venture specializing in the research and development, production and sales of air-conditioning rotary compressors and reciprocating ball-bearing refrigerator compressors. It is controlled by China’s Guangdong Midea Electric Co., Ltd. and Japan’s Toshiba Carrier Co., Ltd. was formed with equity participation.
Product Display
Product Description |
Parameter |
||
Brand: |
GMCC |
Voltage: |
115-120V 60Hz |
Refrigerant: |
R410a |
230W, LRA 15. 2A |
|
Model: |
PA215M2C-4FT |
refrigerante R134a |
|
Origin: |
China |
AP 1.67 MPa, DP 1.67 MPa, SP 5.0 MPa |
|
Specifications: |
Brand new |
SPU25X126AQSB |
|
Type: |
Refrigeration compressor |
250 VAC 12Mf |
|
Application range: |
Refrigeration parts |
Peso 4.8 kg |
|
Material: |
Stainless steel |
|
|
Product Media
Installation Process
1. Check whether the refrigerating oil of the original compressor is too dirty. If the oil is too dirty, the system must be cleaned with nitrogen and the dry filter must be replaced.
2. Check whether the contacts of the compressor operation control AC contactor are stuck or have poor contact, causing the compressor to run out of phase. If the compressor is damaged in the coil winding, the AC contactor of the same model must be replaced.
3. Check and protect the circuit. The high and low pressure switch is in the closed state in the normal refrigerant compression state, the high pressure limit is less than or equal to 2.2Mpa, and the low pressure is more than or equal to 0.28Mpa.
4. Check whether the radiator is too dirty and must be cleaned.
5. Check whether the original equipment has refrigerant pressure, and repair it if the refrigerant is leaking.
1. Disconnect the power supply.
2. Disassemble the compressor and check its old compressor.
3. Nitrogen cleaning system, steps, disassemble the filter and blow in nitrogen from the inlet of the radiator, discharge from the outlet of the radiator, then blow in from the inlet of the filter, release from the return pipe of the compressor, and repeat cleaning several times.
4. Install the new compressor and weld the new filter.
5. Use nitrogen to pressure, 2.0Mpa pressure for leak detection for 30 minutes.
6. Circuit check and replace damaged parts, check power supply and control circuit.
7. Clean the radiator.
8. Vent the nitrogen and evacuate for 30 minutes.
9. Add the same type of refrigerant
10. Power-on debugging, check the compressor current and voltage, the normal pressure of the refrigerant, high pressure 1.7Mpa, low pressure 0.45Mpa, the refrigerant charge is expected to be 0.7kg/hp (10-30hp).
Packing & Shipping
Q: What means of transportation?
A: It can be shipped by air to the nearest international airport or by courier like DHL, TNT to your address; if it's not urgently required, they can also be shipped by sea to the nearest sea port.
Q: How long is your delivery time?
A: Usually, if it is in stock, it will take 5 to 10 days. Or, if there is no stock, it is 15-20 days, depending on the quantity.
GMCC is a large-scale Sino-Japanese joint venture specializing in the research and development, production and sales of air-conditioning rotary compressors and reciprocating ball-bearing refrigerator compressors. It is controlled by China’s Guangdong Midea Electric Co., Ltd. and Japan’s Toshiba Carrier Co., Ltd. was formed with equity participation.
GMCC Compressor PA215M2C-4FT
People who bought this item also viewed
Rechi Compressor 44R273A
Bristol Compressor H75A35QDBEA
GMCC Compressor PH290M2C-4FT1
GMCC Compressor BH240X2CS-20KU
GMCC Compressor PH310M2CS-4KUH
GMCC Compressor PH420G2CS-4KU1
Copeland Compressor ZR36K3-PFJ-522
Danfoss Compressor MLZ030T4LC9
Copeland Compressor CR62KQM-TFD-203
Sanyo Compressor C-SBN301H5A
Schneider Transformer ABL6TS06J
Danfoss Expansion Valve 067N5166
Eaton Contactor DILM170C(RDC24)
ADDA Fan AD0824XB-A71GL
Italvibras Electric Motor MVCC 3/200-MF
Baldwin Filter H9072
Danfoss Sight Glass SG6S
TAIYO Capacitor TMK325BJ226MM-T
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Eaton Vickers Vane Pump 3520VQ-25A11-1CC20
Renishaw Encoder RGH22X15F00A
Recent related posts
-
07/28/2020
Overview of refrigeration compressor classification
The compressor is the core equipment in the refrigeration system. Only by converting electrical energy into mechanical work and compressing low-temperature and low-pressure gaseous refrigerant into high-temperature and high-pressure gas can the refrigeration cycle be ensured
-
06/30/2022
Types of Check Valve
Depending on the design of the check valve, they will operate slightly differently. The most common check valve is a spring loaded in-line check valve, however, we will discuss multiple types below.
-
09/15/2021
6 Reasons for Refrigeration Compressor Not to Start
When speaking of air conditioners, everyone is familiar with them. Especially in the hot summer, we would not know how to live without it.
-
12/06/2020
The working principle of oxygen generator (oxygen machine)
The working principle of oxygen generator (oxygen machine) The oxygen generator adopts pressure swing adsorption (PSA)-pressure adsorption and atmospheric pressure desorption (HP) method. After the raw material air is pressurized by an oil-free compressor,
-
08/11/2020
Some ways of energy saving for semi-hermetic refrigeration compressors
The semi-hermetic refrigeration compressor is a very common mechanical equipment in the society. It is very common in our lives. The reasonable use of semi-hermetic refrigeration compressors can greatly increase production efficiency and production benefits for businesses.
-
12/08/2021
Differences Between Smart Pressure Transmitter and Analog Pressure Transmitter
Pressure transmitter is composed of single chip microcomputer and micro displacement (differential) pressure sensitive element, which can complete multi-function detection and conversion from non electric quantity to electric quantity.
-
06/09/2023
AC Making Noise When off: Where is the Noise from and What to Do?
If you’ve ever heard your AC making noise when off, it can be a bit unnerving. You may wonder what's causing the noise and what you can do to fix the problem.
-
06/13/2020
The application of photovoltaic central air-conditioning technology will continue to extend
The application of photovoltaic central air-conditioning technology will continue to extend The "Renewable Energy Power Quota Assessment Measures (Trial)" has been discussed and approved in principle by the National Development and Reform Commission's di ﰸ2 䀀
-
10/15/2022
Servo Motors: Construction, Types, Advantages & Applications
1. Motor—a component that converts electrical energy into rotational mechanical energy.
-
10/04/2023
Refrigerated Air Dryer: Everything You Need to Know
If you work in an industry that requires compressed air, you know that moisture is a common problem. When compressed air is cooled, it can condense, leading to water droplets that can damage equipment, cause corrosion, and affect the quality of the final product. That's where refrigerated air dryers come in.