Mitsubishi Compressor AGT201A516DH
Type: Refrigeration Compressors
Brand: Mitsubishi
Mitsubishi Compressor AGT201A516DH
Technical data
Model |
Scroll Compressor |
Elektrik |
3PH - DC Inverter |
Refrigerants |
R-410A |
Mitsubishi inverter compressor Technical note:
①, frequency variable capacity technologies +: Host compressor imported from Japan, "Mitsubishi Electric" 10P conversion press ( HHV92FAA-YJ ), is 15HZ ~ 130HZ stepless, slave compressor imported from Japan "Mitsubishi Electric" 10P fixed frequency compressor ( ZHC165YDA-J ), with 40 %, 60 %, 100 % variable capacity, the system can automatically adjust the operating status of each outdoor unit according to the requirements of the internal unit capacity, and make full use of outdoor replacement The heat exchanger greatly improves the operating efficiency of each capacity section, realizes high-efficiency heat exchange, and saves energy and electricity.
② Small load and large heat exchange technology: When the main engine operating frequency reaches 80Hz and still cannot meet the needs, the frequency will not be increased, and the screwdriver will operate at half load in turn. With a load of 20 horses and a condensation effect of 40 horses, the efficiency is increased by 30 %.
③ Four-sided heat exchange technology: High-efficiency internal double-threaded tube heat exchanger, four-sided return air technology, heat exchange efficiency increased by 30 %
④, indoor unit priority control: you can set the priority of the indoor unit and set the priority level. Priority is given to ensuring the use of air conditioning in important rooms during peak seasons.
⑤. Modular minimum outdoor unit technology-elevator can be transported: the outdoor unit is small in size and the overall size is 990
× 750 × 1700mm less space; outdoor modular combination, can be combined directly in the field, or even be used directly Lifts building, installation and transportation is very convenient
⑥, large frequency inverter compressor press adding +: host using 10HP vortex Rotary frequency conversion compressor, the sub-machine uses 10HP fixed frequency compressor, the speed is as high as 7200 rpm, to ensure that the capacity is not compromised under the condition of ultra-long piping.
⑦, long pipe, high drop, more convenient installation: the first branch to the farthest indoor unit allow many lengths up to 50m, the gap inside and outside of 50m , indoor drop to 20m , more suitable for modern high-rise commercial environment. ⑧. The PMV+ pressure sensor control system uses PMV to control the flow of refrigerant and pressure sensor to detect the pressure of the system refrigerant, adjust the system in time according to the detection results, and control the PMV opening to ensure indoor