Minebea

Specification: 42 MM
Height: 29.5 MM
Output shaft: 5 MM
Front output shaft length: 20 MM
Rear output shaft length: 10 MM
Step angle: 0.9
Resistance: about 1 ohm
Lead: two-phase four-wire
Line length: 140 MM (the line is sent)
Current: 1.3 A

Specification: 6*8*15 MM
Gear box diameter: 8 MM
Output shaft diameter: 1.5 MM (flat position 1.3 MM)
There is a copper sleeve on the shaft, the outer diameter is 4MM, and the flat position is 3.5 MM
Output shaft length: 2.5 MM
Electric Motor length: 26.5 MM (Electric Motor + gear box)
Reduction ratio: 1: 151.7
Rated torque of output shaft: 200 g.cm
Maximum torque allowed at a moment: 600 g.cm

Body height:33.5mm
Length of output shaft:20mm
Torque:0.25N.m
Phase resistance: 1.8ohm
6V short circuit current:2.6A

Minebea Electric Motor DNQ10M31R15F

Minebea Electric Motor SMW359605B

Minebea Electric Motor 17PY-Z249-P2VS

Cable length: about 70mm
Connection method: red wire positive, black wire negative
Applicable voltage: DC 3-12V
Voltage: DC3V
No-load current: 20mA
Locked-rotor current: 0.2A
No-load speed: 4020 rpm
Voltage: DC6V
No-load current: 25mA
Locked-rotor current: 0.4A
No-load speed: 8200 rpm
Voltage: DC12V
No-load current: 60mA
Locked-rotor current: 0.8A
No-load speed: 14,500 rpm

Drive voltage: 24[v]
Current/phase: 500[mA]
Winding resistance/phase: 50ohm 6.6ohm
Electric Motor material: foam plastic (MSPL), magnetism (mspl), degenerate fading sintering (ms50), neodymium (ms70)

Minebea Electric Motor PM20L-020-CTB0

Stepper Electric Motor specifications: 42 MM
Light Electric Motor height: 33.5 MM
Output shaft: 4 MM (with a copper gear on it)
Output shaft length: 12.5 MM
Step angle: 1.8
Resistance: about 2.6 ohms
Lead: two-phase four-wir
Cable length: 180 MM

Minebea Electric Motor 17PM-F340BG02CN

Body height:37.5mm
Length of output shaft:22mm
Torque:0.28N.m
Phase resistance: 1ohm
6V short circuit current: 4.2 A