Festo Air Cylinder ADN-32-90-A-P-A
Type: Air Cylinder
Brand: Festo
Piston diameter: 32 mm
Type code: ADN
Based on norm: ISO 21287
Cushioning: Elastic cushioning rings/pads at both ends: Self-adjusting pneumatic end-position cushioning
Mounting position: Any
Design: Piston: Profile barrel: Piston rod
Position sensing: For proximity sensor
Variants: With anti-twist protection: Low friction: Laser etched rating plate: Continuous, hollow piston rod: Constant, slow movement: Special thread on piston rod: Extended external thread piston rod: High corrosion protection: Explosion protection certification (ATEX): Through piston rod: Temperature range -40 to 80 Celsius Degree: Increased service life: Heat-resistant seals max. 120Celsius Degree: Extended piston rod: Dust protection: Piston rod at one end
Operating pressure: 0.6 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: c T4
ATEX category for dust: II 2D
Type of (ignition) protection for dust: c 120Celsius Degree
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 1 (ATEX): Zone 21 (ATEX): Zone 22 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 120 Celsius Degree
Theoretical force at 6 bar, retracting: 415 N
Theoretical force at 6 bar, advancing: 415 N - 483 N
Moving mass at 0 mm stroke: 60 g
Additional weight per 10 mm stroke: 30 g
Basic weight with 0 mm stroke: 265 g
Additional moving mass per 10 mm stroke: 9 g
Type of mounting: Optionally:: With internal thread: With through-hole: With accessories
Pneumatic connection: G1/8
Note on materials: RoHS-compliant
Cover material: Anodized: Aluminum
Piston rod material: High-alloy steel
Material of cylinder barrel: Smooth anodized: Wrought aluminum alloy