Piston diameter: 63 mm
Type code: ADVULQ
Cushioning: Elastic cushioning rings/pads at both ends
Mounting position: Any
Mode of operation: Double-acting
Piston rod end: Internal thread
Design: Piston: Piston rod
Position sensing: For proximity sensor
Symbol: 00991217
Variants: Piston rod at one end
Protection against torsion/guide: Square piston rod
Operating pressure: 0.6 bar - 10 bar
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
Ambient temperature: -20 to 80 Celsius Degree
Impact energy in the end positions: 0.7 J
Theoretical force at 6 bar, retracting: 1750 N
Theoretical force at 6 bar, advancing: 1870 N
Moving mass at 0 mm stroke: 134 g
Additional weight per 10 mm stroke: 107 g
Additional moving mass per 10 mm stroke: 16 g
Type of mounting: Optionally:: With through-hole: With accessories
Pneumatic connection: G1/8
Flange screws material: Steel, galvanized
Cover material: Wrought aluminum alloy
Material of dynamic seals: NBR: TPE-U(PU)
Piston rod material: High-alloy steel
Material of cylinder barrel: Wrought aluminum alloy
Festo Air Cylinder ADVULQ-63-50-P-A
People who bought this item also viewed
CAMOZZI Air Cylinder 61M2P063A0305
MINDMAN Air Cylinder MCRPLF-90-25-500
AirTAC Air Cylinder SC40X70
Festo Air Cylinder DZF-32-80-A-P-A
Festo Air Cylinder DSBC-32-600-C-PPVA-N3
Festo Air Cylinder DNC-125-50-PPV-A
Festo Air Cylinder ADVC-32-10-I-P-A
Festo Air Cylinder ADVU-32-15-A-P-A
Festo Air Cylinder DSNU-20-30-PPS-A
KOGANEI Air Cylinder NHBDP-20
MINDMAN Air Cylinder MCJA-12-16-10M
Belimo Actuator NRQ24A
SMC Proportional Valve ITV2050-022N
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
TRIAD Transformer TCT40-02E07AB
Siemens VFD Frequency Converter 6SL3325-1TG41-0AA3
Recent related posts
-
06/19/2020
The main reason for the slow heating of air conditioners
There are several reasons for the slow heating of air conditioners: The dirt of the transpiration device and the condenser is too thick, which will cause air flow blockage, affect the heat declaration, and make the air conditioning heating a big discount. The filter is not cleaned for a long time<img src="{{media url="The_main_reason_for_the_slow_heating_of_air_conditioners.jpg"}}" alt="" />
-
08/10/2021
How to Control Speed of Servo Motor & Anti-Interference Measures
A servomotor refers to the actuator to control the operation of mechanical components in the servo system and is a subsidy motor indirect transmission device.
-
12/28/2022
Advantages and Disadvantages of the PLC
The programmable logic controller (PLC) is a digital operating electronic system specially designed for application in industrial environment.
-
09/30/2022
Servo Motor: Basics, Work Principle & Selection
This article introduces the basic knowledge, working principle, selection and related FAQs of servo motors.
-
08/15/2020
What should I do if the refrigeration equipment does not operate normally
Nowadays, in order to prevent the goods from selling well and causing economic losses, more and more businesses are using Xuzhou refrigeration equipment to store excess goods or sell them in anti-seasonal times.
-
07/26/2020
The influence of temperature on refrigeration compressor
In summer, the discharge temperature of the compressor is relatively high and cannot be touched by hands. According to national standards, the exhaust temperature of the R22 refrigeration system should not exceed 150 degrees Celsius.
-
11/19/2022
What are the Differences between Axial and Centrifugal Fans?
Axial fans and centrifugal fans are two different products in the fan category. Their main function is to ventilate the air in the environment.
-
09/15/2020
The working principle of air compressor
The air compressor is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy, and is a pressure generating device for compressed air.
-
09/03/2020
Commonly used selection marks for compressor lubricants
1) Air-cooled piston shaft output power <20kW, select 32, 46, 100 (ambient temperature <-10 ℃ optional 32) DAA, DAB, DAC air compressor oil;
-
07/18/2020
Maintenance method for wear of refrigerator refrigeration compressor
The application of screw refrigeration compressors is becoming more and more common, and some of them have entered the period of frequent failures. When the abrasion of the female and male rotors, body, and exhaust end seat of the refrigeration compressor reaches above 0.65rnm, vibration will occur when the refrigeration compressor is running, the sound is abnormal, the cooling capacity is reduced, and the compressor cannot work normally.