Stroke: 3 mm - 2000 mm
Piston diameter: 63 mm
Type code: DNC
Based on norm: ISO 15552
Cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Piston: Piston rod: Profile barrel
Position sensing: For proximity sensor: None
Variants: Temperature range -40 to 80 Celsius Degree: With anti-twist protection: Piston rod with external hexagon: Continuous, hollow piston rod: Piston rod at one end: Monostable pneumatic valve, fitted on right, piston rod extended when not actuated: Extended piston rod: With end-position locking at both ends: Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated: Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated: With rear end-position locking: Through piston rod: Increased service life: Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated: Clamping unit on the piston rod: Internal thread on piston rod: Special thread on piston rod: Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated: High corrosion protection: Low friction: Heat-resistant seals max. 120Celsius Degree: Monostable pneumatic valve, fitted on left, piston rod extended when not actuated: Constant, slow movement: Extended external thread piston rod: With front end-position locking: Dust protection
Protection against torsion/guide: Square piston rod
Operating pressure: 0.15 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 1 (ATEX): Zone 22 (ATEX): Zone 21 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress: 3 - High corrosion stress
Ambient temperature: -40 to 120 Celsius Degree
Impact energy in the end positions: 0.5 J
Max. torque for protection against rotation: 1.5 Nm
Theoretical force at 6 bar, retracting: 1682 N
Theoretical force at 6 bar, advancing: 1682 N - 1870 N
Type of mounting: With internal thread: With accessories
Pneumatic connection: G3/8
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized
Festo Air Cylinder DNC-63-160-PPV-A-KP
People who bought this item also viewed
AirTAC Air Cylinder SC40X70
MINDMAN Air Cylinder MCQV2-11-40-200
NEW-ERA Air Cylinder PXY-SD12-1-LF
Festo Air Cylinder ADN-50-80-I-P-A
Festo Air Cylinder DGC-40-500-G-PPV-A
Festo Air Cylinder DNU-40-300-PPV-A
Festo Air Cylinder ADN-25-25-I-P-A
Festo Air Cylinder ADVU-50-45-A-P-A
Festo Air Cylinder DSNU-16-200-P-A
MTL Encoder MED-20-360P
SMC Solenoid Valve VQ1101-5C1
Belimo Actuator SR24A-SR-5
SMC Proportional Valve ITV2050-313L2
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
SMC Solenoid Valve VQZ3121-4YZ1-C8
Yamatake Switch 1LS-J700EC
IFM Sensor O7E202
BANDO Belt SPA 2182LW
Panasonic Servo Drive MCDHT3520E
BANDO Belt HP-S8M-400-1120
Recent related posts
-
06/20/2020
Common fault phenomena, causes and elimination methods of piston compressors
Common fault phenomena, causes and elimination methods of piston compressors Common faults of piston compressor (1) Phenomenon: the compressor cannot start Reasons: 1. Electrical circuit failure; 2. High and medium voltage relay and oil pressure relay are disconnected.<img src="{{media url="Common_fault_phenomena_causes_and_elimination_methods_of_piston_compressors.jpg"}}" alt="" />
-
01/23/2022
Factors to Consider When Selecting a Pressure Transmitter with the Diaphragm Seal System
The transmitter with a diaphragm seal system is composed of a diaphragm seal system, the capillary and filling liquid.
-
08/20/2020
Small low-temperature cold storage the unique secret to extend the storage time of fruits and vegetables by 10 times
With the requirements of industry density and specialization, the production areas of fruits and vegetables are mainly concentrated in several places. In order to meet the needs of the national market and even the global market
-
08/13/2020
Safety code for cold storage wire installation
During the installation of the cold storage, it is very important whether the wires can ensure the safety of later use. For example, explosion-proof cold storage must use explosion-proof wires in the explosion-proof area
-
03/18/2021
The working principle and the common wiring method of the servo drive
The servo drives, the motor under the command signal from a control system, so whether the drive can work normally or not directly affects the overall performance of the equipment. In the servo control system, the servo drive is equivalent to the brain, and the servo motor is equivalent to the hands and feet.
-
05/09/2023
What is Refrigeration Cycle? The Refrigeration Cycle Explained
The refrigeration cycle is a cyclic process in which heat is transferred from a low-temperature object (or environment) to a high-temperature object (or environment) through a refrigerant, thereby cooling the object to a temperature lower than the environment and maintaining this low temperature.
-
04/20/2022
Six Level Measuring Instruments and Relative Merits?
Float level meter is an instrument of measuring liquid level based on buoyancy principle. Usually, the combination of floating ball and scale enables the observer to intuitively read the height of liquid level.
-
06/20/2020
Structure of multi-vane compressor_Characteristics of multi-vane compressor
Structure of multi-vane compressor_Characteristics of multi-vane compressor <img src="{{media url="Structure_of_multi-vane_compressor_Characteristics_of_multi-vane_compressor.jpg"}}" alt="" /> The sliding vane refrigeration compressor is a positive displacement rotary compressor. It can be divided into two types: single slide type and multi slide type. Multi-slider compressors are currently mainly used as low-pressure compressors with two-stage compressors.
-
06/14/2020
Compressor
Compressor: It is the heart of refrigeration and heating cycles.
-
10/15/2022
Servo Motors: Construction, Types, Advantages & Applications
1. Motor—a component that converts electrical energy into rotational mechanical energy.