Festo Air Cylinder DSBG-Q-32-100-P
Type: Air Cylinder
Brand: Festo
There is no price at present, you can Request a Quote
Piston diameter: 32 mm
Type code: DSBG
Cushioning: Elastic cushioning rings/pads at both ends: Self-adjusting pneumatic end-position cushioning: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Cylinder barrel: Tie rod: Piston rod: Piston
Position sensing: For proximity sensor
Variants: Constant, slow movement: Through piston rod: Temperature range 0 to + 150 Celsius Degree: Internal thread on piston rod: Hard scraper: With anti-twist protection: Low friction: Low friction for balancer applications: Piston rod at one end: Sintered bearing: Temperature range -40 to 80 Celsius Degree: For unlubricated operation: Bellows on bearing cap: Metal scraper: Heat-resistant seals max. 120Celsius Degree: Extended external thread piston rod: Extended piston rod
Operating pressure: 0.1 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX): Zone 22 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 150 Celsius Degree
Impact energy in the end positions: 0.4 J
Cushioning length: 20 mm
Theoretical force at 6 bar, retracting: 415 N
Theoretical force at 6 bar, advancing: 415 N - 483 N
Moving mass at 0 mm stroke: 110 g
Additional weight per 10 mm stroke: 25 g
Basic weight with 0 mm stroke: 465 g
Additional moving mass per 10 mm stroke: 9 g
Type of mounting: With internal thread: With accessories: Optionally:
Pneumatic connection: G1/8
Note on materials: RoHS-compliant
Cover material: Die-cast aluminum: Coated
Piston rod material: High-alloy stainless steel
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized