Shaft rotation:Clockwise (please contact Settima for counter clockwise)
Shaft speed:From 150 to 6.500 rpm
Flows:From 6 L/min up to 330 L/min (at 1.500 rpm)
Operating pressure:
Max. Continuous: 275 bar/3,988.5 PSI
Max. Cycle ON/OFF: 280 bar/4,061 PSI
Inlet pressure:0,8 – 3 bar
Fluids:Mineral oil
Environmental temperature:From -15°C up to +60°C
Settima Gear Pump GR47n40FVuAEBAT13
People who bought this item also viewed
Sumitomo Gear Pump QT23-8F-A
TLV Check Valve CKF3M-DN25
REXROTH Overflow Valve DBDH20K1X/100
KOMPASS Piston Pump V15F1L10X
YUKEN Vane Pump SVPF-20-70-20
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
SIEMENS NIC Card 6GK1102-6AB00
Aucma Air Conditioner KFR-72LW-BpA01-FH1(X)
AirTAC Air Cylinder SCD63X25
VISHAY Capacitor MAL214699507E3
Recent related posts
-
09/18/2020
The current sales model of air compressors
1. Head office→regional agent→distributor→salesman→customer (representing company: Fusheng, Atlas, etc.) ⑴. It takes about four stages to reach the customer, and the profit is also reduced considerably (because the intervention of the middleman increases the cost)
-
09/16/2020
The development of screw air compressor
Since the advent of screw compressors in 1934, after decades of technological improvement, screw compressors have been widely used, especially in refrigeration.
-
07/27/2020
Ten reasons for the burning of air conditioning compressors
During the starting process of the air conditioner compressor, there is generally a step-down starting circuit, but the starting current will exceed several times the rated current, and the starting temperature of the air conditioner compressor motor will rise very quickly.
-
09/09/2020
Industrial bearing knowledge
Structural features Bearing seat: The bearing seat is made of cast iron with heat sink on the surface. The mating surface of the bearing seat and the bearing bush is spherical. Bearing seats are divided into two types: insulated and non-insulated.
-
07/20/2022
Common Faults and Solutions of Diaphragm Pump
During the operation of the diaphragm pump, there should be no abnormal sound, and all parts should be free of running, emitting, dripping, leakage and other phenomena.
-
01/18/2022
Transmitter Common Faults & Diagnosis Methods
Transmitter faults mainly include complete fault, bias fault, shifting fault, and precision degradation fault. This is shown in figure 2.
-
06/21/2020
What to do if the air conditioner is not cooling
Air conditioning does not refrigerate mainly from the following aspects to solve: 1, regular cleaning and maintenance of air-conditioning outside machine. 2. Replace the old air conditioner that has exceeded the service life. 3. Check whether the copper pipes of the indoor and outdoor units of the air conditioner are too long. 4. Check whether the power of the air conditioner matches the indoor space. 5. Check whether the installation environment of the air conditioner is suitable. 6. Replenish refrigerant. <img src="{{media url="magefan_blog/What_to_do_if_the_air_conditioner_is_not_cooling.jpg"}}" alt="" />
-
09/05/2020
Analysis on the components of compressed air system
The compressed air system is composed of the air supply end to the air consumption end as follows: air compressor→air storage tank→filter→dryer→air pipeline→air port.
-
12/14/2021
What Data Can a Human Machine Interface (HMI) Tablet Collect?
Due to the shortage of energy supply, and increasingly significant environmental problems, new energy resources have been gradually known to people. Wind energy is a type of renewable clean energy.
-
06/26/2020
Analysis of common faults and solutions of air-conditioning compressors
The air conditioning compressor is the heart of the refrigeration system and the power source for the refrigerant to circulate in the system. The basic working principle of the refrigeration system mainly includes the four processes of compression, condensation, throttling and evaporation.