Range:40 m (131 ft) 100 m (328 ft)
Process temperature:-40 to 100 °C (-40 to 212 °F) -40 to 200 °C (-40 to 392 °F)
Process pressure:up to 3 bar g (43.5 psi g) option
Communications or outputs:HART, PROFIBUS PA
Input voltage: 100 ~ 230V AC Feature software: Single point model Communication (Smartlinx): No module output relay: 3 relays, 2 type A, 1 type C, 250V AC Certification: general purpose, CE, CSA US/C, FM, UL, listed
Input voltage: 12 ~ 30 VDC Feature software: Single point model Communication (Smartlinx): No module Output relays: 1 relay (1 Form A), 250 V AC Certification: General purpose, CE, CSA US/C, FM, UL, listed
Probe, ultrasonic level The level gauge is used for liquids and slurries. The electronic components and the sensor are packaged together. With multi-language manual,. Range: 5 m "Sensor part: PVDF copolymer, 2"" NPT" Model and certification: 24VDC, 3-wire, CSA, CE (EN61326), FM..
Pointek CLS100: AISI316L process connection, a compactly designed 2-wire level switch, suitable for reliable measurement interface in narrow places, solid, liquid, slurry and foam using frequency reversal technology (sensor part length 100mm).. Process connection (AISI 316): 3/4" NPT thread certification: General purpose model/option: screw cap type "1/2 "" NPT cable inlet" None
Echomax XPS-10 sensor: high frequency ultrasonic sensor, applied spectral band for liquids and bulk materials; used together with permitted analyzer. With integrated temperature sensor. Measuring range: minimum 0.3 m, maximum 10 m Mounting thread and surface: 1'' NPT, foam surface Cable length: 5 meters without ATEX II 2GD, FM Class I Div 2/SAA Class 1 Zone 1
Sitrans LR 200: Flange connection/pole antenna, 2-wire loop-powered pulse level meter, measuring liquid and simple process tank, measuring range 20 meters (65 ft). Antenna material: PTFE-Teflon 1-1/2'' G Threaded connection, 316 stainless steel fluorine-free rubber O-ring, cannot be used for FF flanges and antenna options 0,1,2 Housing/cable entry: epoxy resin coated aluminum 2 X 1/2" NPT, communication/output Terminal: 4 ... 20 mA, HART, general purpose when starting less than 3.6 mA, CE, including European radio certification (R&TTE), 5.8 GHz 0.5 bar (7.25 psi) maximum
Sitrans LR 200: Integrated PP pole antenna model, 2-wire loop-powered pulse radar instrument, measuring 20 meters of liquid or simple process tank, maximum temperature 80°C, maximum pressure 3Bar aluminum, epoxy coating, 2 X 1/2” NPT cable entry 1-1/2” NPT, polypropylene, with 100mm shield (max 3 Bar, 80°C) General purpose, CE, including European radio certification (R&TTE), 5.8 GHz 4- 20mA, HART.
SITRANS LU150 integrated small-range ultrasonic level transmitter two-wire system, 4 to 20 mA loop-powered type. It is usually suitable for liquids, slurries and bulk materials in open or closed containers. The height of the container can reach 5 meters (16.4 Feet) Transmitter/process connection PVDF polymer, 2" NPT [(cone), ANSI/ASME B1.20.1] cable entry 1/2" NPT stainless steel entry (cable gland not included)
Input voltage: AC voltage 100-240V Additional input/output card: For PID control and online calibration needs: cassette 2 analog Input and 2 analog output software options: Standard additional storage: No additional storage Data communication: SmartLinx compatible housing: Standard housing, 4 lead-in parts, M20 trade approved label: No trade approved label License: CE, CSA US/C, FM, RCM, EAC, KCC
Measuring range and process temperature range: 40 m maximum measuring range, -40 ... -100 C process interface. General flat flanges comply with ANSI/DIN/JIS standards: 3" / 80 mm, painted aluminum, integrated adjustment device housing (with cable entry): stainless steel, 1 x M20 x 1.5 (including plastic threaded joints) Label: Sitrans LR560 Nominal pressure: 0.5 bar g (7.5 psi g) Maximum output/communication: 4 ... 20 mA
Process interface: general flat flange, in line with ANSI/DIN/JIS standards, adjusting flange type EA, with adjusting flange ball: 3" / 80 mm antenna: 3" horn antenna, suitable for 80 mm or 3" tube Set of cleaning connection (automatic cleaning): No cleaning connection Output/communication: 4...20 mA, HART cable entry: 2 x M20 x 1.5