LG LS Contactor MC-9b 1345005700

07/09/2022

Components and Types of Mechanical Seals

A mechanical seal is a device used on a rotating shaft to keep fluids in and contaminants out. It prevents the fluid moved through an asset, most often a centrifugal pump, from leaking.

09/10/2020

Regular maintenance and maintenance of Fusheng air compressor

1. Regular maintenance and maintenance of main components In order to enable the air compressor to operate normally and reliably and ensure the service life of the unit, a detailed maintenance plan must be formulated, manned operations, regular maintenance, and regular inspection and maintenance are required to keep the air compressor unit clean, oil-free, and dirt-free.

09/07/2020

Ten points to judge the pros and cons of inverter products!

The technical grade of the frequency converter is gradually developed and formed. With the improvement of use requirements and the development of technology, the quality of the device, the expansion of functions, and the progress of automation technology, it will gradually advance.

06/14/2020

York YK centrifugal water chiller overhaul; unit vibration failure

York YK centrifugal water chiller overhaul; unit vibration failure York YK centrifugal water chiller overhaul, unit vibration failure: Reason: Remedy: • Coupling is out of center • Realignment • Bearing wear • Overhaul and replace the bearing 器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

06/14/2020

What to do if the screw chiller compressor is damaged

The compressor is the core component of the chiller. Damage to the compressor is a serious fault that needs to be dealt with in time, otherwise the chiller will not work. Today, the editor will introduce the knowledge and process of handling damaged screw器2䀀

07/22/2020

The working principle of cooling and heating of air conditioning

In addition to the cooling function, the heating and cooling air conditioner also has the heating function. The biggest difference from a single-cooling air conditioner is that an electromagnetic four-way reversing valve is installed in the heating and cooling air conditioner.

06/20/2020

What are the causes of air conditioning trip

What are the causes of air conditioning trip 1. The contradiction between the rated current of the air conditioner and the current carrying capacity of the wire. 　　Here are two formulas involved: 　　①The rated current of air conditioner I=P÷U ÷power factor, the power remains unchanged, the smaller the voltage, the greater the current required. 　　② The current carrying capacity of the wire I=U÷R, the voltage is proportional to the current. 　　 So when the power supply voltage is normal, we must consider the line voltage drop. The longer the line, the greater the resistance, the greater the voltage drop, and the smaller the output current at the end. However, because the power of the load remains unchanged, the voltage becomes smaller, and the current that needs to be output will be larger. At this time, the wire is forced to overload, and the time will cause heating, and eventually cause the tripping of the open circuit. 　　 Some friends said that the heat of the wire will not cause the tripping of the circuit breaker. In fact, the manufacturer of the air switch has made it clear in the relevant manuals that the heat of the wire will cause the air switch to trip. Because the wire heats up, the crimp terminal will also heat up, and the resistance will become larger and larger. The larger the resistance, the greater the current consumption, and the hotter it will be, a vicious cycle. 　　 2. Leakage 　　During the daily maintenance work, we will encounter the situation that the air circuit trips due to the leakage of electricity. At least I have not experienced it once or twice. Regardless of the leakage of the neutral line or the leakage of the live line, a long time will cause the circuit breaker to trip. 　　Why does the electric leakage cause the MCB to trip? There are two situations. 　　 ① Good grounding. At the beginning, the leakage current was not large, and as time went by, the leakage current became larger and larger, and eventually evolved into a short circuit to ground, unable to close. 　　②There is no ground wire. If the equipment is not connected to the protective ground, when the wire leaks to the equipment, it is equivalent to adding a large shunt resistance. Like this problem, if the air conditioner does not have a ground wire, when the wire leaks to the air conditioner, the air conditioner is a very large shunt resistor and will consume a lot of current. Eventually, the wire will heat up or trip open. 　　How to determine whether the trip caused by the above two aspects can be done with a clamp ammeter. 　　 ① Measure the voltage at the input and output to see if there is a significant change in voltage drop. 　　②Measure whether the output current exceeds the standard. 　　 So my suggestion is: first measure the supply voltage to see if it is within the allowable fluctuation range. Then measure the current to see if it exceeds the rated ampacity of the wire. Finally, check the data one by one according to the measured data to find out the reason.

08/10/2020

Exploring the secrets of refrigerated compartments

As an important transportation equipment in cold chain logistics transportation, refrigerated trucks are the key to ensuring the safety of perishable and fresh food during transportation.

06/26/2024

10 Hydraulic Parts Manufacturers from China

In the production of hydraulic parts, some local Chinese companies are also booming. The following introduces some hydraulic parts companies from China.