Basic requirements for choosing gas storage tanks
First of all, choose the products of large enterprises and well-known brands of gas storage tanks. The products of these gas storage tank companies not only strictly implement the GB150-98 "Steel Pressure Gas Storage Tank Container" standard, but also form their own corporate standards. At the same time, these companies have advanced production equipment, strict production process management, and the quality of raw materials used. it is good. Although the prices of the products of these companies may be relatively expensive, they can guarantee the products when they are used, and use them with confidence. In addition, products produced by companies that have passed multiple quality system certifications are also selections.
The second is to look at the appearance. The appearance of the product reflects its grade and value. Only formal and powerful manufacturers have advanced equipment guarantees and a good quality assurance system to ensure the grade of the appearance of the product. The trademark of a high-quality gas storage tank is very obvious, and the brand of the gas storage tank can be clearly known 50 meters away from the gas storage tank. Approaching the gas storage tank, the tank itself has bright color, uniform surface treatment, flat welds and clear lines, so it is best to buy new products.
The third is to look at the product nameplate. The nameplate should indicate the name and production date of the manufacturer and supervisory inspection unit, and whether there is a seal of the supervisory inspection unit in the upper right corner of the nameplate, and the product number, weight, volume, and load must be indicated on the nameplate. The highest pressure, working pressure, and the pressure of the water pressure test, the medium of the gas storage tank must also be marked. The steel stamp number of the product must be directly under the nameplate of the entire tank, and the stamp number must be consistent with the number on the nameplate. Found that the two numbers are inconsistent, it is best not to buy.
Fourth is to read the quality assurance certificate. According to relevant national regulations, each gas storage tank must be accompanied by a quality assurance certificate when leaving the factory. The quality assurance certificate is an important document to prove that the gas storage tank is qualified. If there is no quality assurance certificate, even if the price It is safe to use, please do not buy it.
Basic requirements for choosing gas storage tanks
Recent related posts
-
09/09/2020
Basic requirements for choosing gas storage tanks
First of all, choose the products of large enterprises and well-known brands of gas storage tanks. The products of these gas storage tank companies not only strictly implement the GB150-98 "Steel Pressure Gas Storage Tank Container" standard, but also form their own corporate standards.
-
09/09/2020
Calculation method for determining air consumption of air compressor
The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m³/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor.
-
09/09/2020
Characteristics of Market Operation of Contract Energy Management
EMC's energy system transformation uses contract energy management mode to serve customers, which overcomes the current energy-saving work faced by my country, such as: lack of corporate energy-saving investment awareness, insufficient energy-saving investment funds, low-efficiency energy-saving projects "headache" and system efficiency.
-
09/09/2020
Choose four major indicators of frequency conversion air compressor
The frequency conversion technology was not originally born in the air compressor field, but with the development of the economy, all walks of life will inevitably develop in the direction of energy saving, environmental protection and low carbon.
-
09/09/2020
Classification of air filters
Air filter has three methods: inertia, filtration and oil bath. ①Inertial type: Since the density of impurities is higher than that of air, when the impurities rotate or make sharp turns with the air, the centrifugal inertial force can separate the impurities from the airflow.
-
09/09/2020
Compared with frequency conversion air compressor, what are the problems of traditional air compressor
Compared with frequency conversion air compressors, traditional air compressors have certain shortcomings. What are the manifestations? Next, the editor of okmarts.com will tell you what are the problems with traditional air compressors.
-
09/09/2020
Comparison of screw type and piston type air compressor
Friends who are often exposed to air compressors should know the basic difference between piston air compressors and screw air compressors. They have obvious differences in structure, moving parts and operating parts, as well as consumption life and performance. , The following brings you some knowledge about the difference between the piston machine and the screw machine.
-
09/09/2020
Compressor companies have caused the misunderstanding of killing, how many tricks have you hit
In recent years, many machinery manufacturing companies, including the compressor industry, have suffered unprecedented tests. Some are not adaptable due to the transformation of the economic system, and there are also "secret injuries" from the company’s own business strategy.
-
09/09/2020
Detailed introduction of air compressor equipment and units in petrochemical industry
In petrochemical enterprises, for the three units of oil refineries (smoke, main fan, air pressure and hydrogen compressor), the five units of fertilizer plants (air compressor, synthesis gas, ammonia compressor, CO2, raw gas or nitrogen pressure) The three units (pyrolysis gas, ethylene, propylene) of the ethylene plant are customarily called large units or key units.
-
09/09/2020
Effective methods to improve the knowledge level of China's dryer technology and drying equipment
The drying equipment industry is engaged in the development of small businesses, new products, and perfect introduction of new products mainly to imitate each other. It is recommended to develop advanced technology and improve product quality.
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SUMTAK Encoder IRS320-2500-010
Littelfuse Fuse 0695050.PXPS
REXPOWER Gear Pump RGP-2A-F06