Elco Sensor OM18E-K400VP6Q
Type: Sensor
Brand: Elco
Connection: M12 Connector
Type: Sensor
Brand: Elco
Type: Sensor
Brand: Elco
TAKEX Sensor F2R-FR8E
Contrinex Sensor DW-AD-301-M4
Contrinex Sensor ND40-SB-Q44S
Contrinex Sensor DW-AD-502-065
JUMO Transmitter 00688825
Siemens Flame Detector QRA53.G27
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Daikin Air Conditioner RUXYQ66AB
LS Mecapion Encoder S30-4-500ZO
Schneider Relay LR3D10
AirTAC Air Cylinder TCMJ40X50S
YONGSUNG Relay YSLT-F005230M
SANGEE Fan SJ1232
08/27/2020
With the continuous development of modern textile technology, compressed air has been widely used. Compressed air in the textile industry is used in pneumatic pressurization, pneumatic weft insertion, air jet twisting,
08/15/2020
"The free installation was stated at the time of purchase, but not only did the on-site installation charge for materials such as external machine brackets and copper pipes, but also charge for labor.
09/14/2020
Okmarts.com recently developed a set of compressed air quality testing equipment that can detect the dust content, oil content and pressure dew point of compressed air online.
06/14/2020
This is the reason for the overheating of refrigeration compressor exhaust~! The main reasons for the exhaust temperature overheating are as follows: high return air temperature, large motor heating capacity, high compression ratio, high condensation pre 器2 䀀 ᅵ皥 䖒皦즠Ʋ煔क़ 㲈Ʋ 䌁
06/14/2020
The function and classification of refrigeration oil and the requirements of refrigeration equipment for refrigeration oil
07/26/2022
During a rotation cycle, the volume between adjacent vanes changes because of the rotor’s eccentric mounting position. This creates the pumping action.
03/02/2021
1.Positioning or residual torque: when there is no current passing through the winding, the torque required to make the output shaft of the motor rotate. 2.Driver: an electrical control device used to run the stepping motor. This includes power supply, logic programmer, switching element and a variable frequency pulse source which determines the step rate. 3.Dynamic torque: the torque produced by the motor at a certain step rate. The dynamic torque can be expressed by PULL IN torque or PULL OUT torque.
03/20/2023
The vacuum pump refers to a device or equipment that uses mechanical, physical, chemical or physical-chemical methods to extract air from the pumped container to obtain a vacuum.
01/03/2023
Solenoid coils are built using the presence of a magnetic field around a wire. It is wound in a spiral shape to strengthen the magnetic field, i.e.
04/11/2022
The expansion valve is installed at the inlet of the evaporator. Its function is to eject the high-temperature and high-pressure liquid refrigerant from the receiver dryer from the small hole of the expansion valve.