Siemens Sensor 3RG4021-7GB33
Type: Sensor
Brand: Siemens
Operating distance: 2.5 mm
Operating voltage: 15-34 V DC
Output: NPN NO
Connection: M8 connector
Type: Sensor
Brand: Siemens
Type: Sensor
Brand: Siemens
TAKEX Sensor NE2-T30R
Contrinex Sensor BD4-S1-M12
IFM Sensor PI1698
Banner Sensor SL030VB6
Danfoss Transmitter 060G6391
Honeywell Flame Detector C7061A1046
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
SUNS Switch AZ-8107
Advantech PLC ADAM-4501D
CKD Air Cylinder CMK2-LB-32-60-T0H-D
Danfoss Transmitter 060G1401
02/01/2023
Gear ratio, i.e., the reduction ratio of the reducer, refers to the ratio of the instantaneous input speed to the output speed in the reduction mechanism, and is represented by the symbol "i".
09/08/2020
The compressed air produced by the compressor is not pure. This is because the air compressor itself contains lubricating oil. During the compression work, part of the lubricating oil must be mixed into the compressed air.
03/20/2023
According to the working principle of vacuum pump, there are two types of vacuum pumps.
08/02/2020
The new refrigerant R450A is a substitute for R134a, which is environmentally friendly and reliable. There are still few studies on it.
06/14/2020
The damage of the motor coil is mainly manifested as the destruction (short circuit) and open circuit of the stator winding insulation. After the stator winding is damaged, it is difficult to be found in time, which may eventually cause the winding to bur 器2 䀀 ᅵ皥 䖒皦즠Ʋ煔क़ 㲈Ʋ 䌁皦 ᮔDž༬皧煞क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱
01/05/2024
Compared to other power sources, charging stations (charging piles) have much greater heat dissipation requirements, making the thermal design of the system extremely strict.
09/22/2020
The economical and common methods for cleaning the oil circuit of the cooler during maintenance work: Using water pump circulation cleaning method:
05/12/2023
The air conditioner mainly relies on the work of the air conditioner compressor (AC compressor) to achieve the cooling cycle.
09/07/2020
Threads are used to deal with machinery every day, especially hydraulic and pneumatic. For a long time, domestic and foreign, metric and imperial, straight cone, sealed and unsealed, inner and outer, 55 degrees and 60 degrees .
08/27/2020
With the continuous development of modern textile technology, compressed air has been widely used. Compressed air in the textile industry is used in pneumatic pressurization, pneumatic weft insertion, air jet twisting,