Siemens PLC 6AG1312-5BF04-7AB0

09/03/2020

Where is the compressed air we have been talking about

We always mention the term compressed air. Do you know where compressed air is used? 　　 dry cleaning 　　 After the "washing" cycle of chemical solvent treatment, the clothes are "dried" in the cycle of dry and pure compressed air.

09/07/2020

Reasons for rust or corrosion of gas tank

The gas storage tank is a part of the post-processing equipment of the air compressor, which mainly plays the role of gas storage, buffering, pressure reduction, and drainage. It will inevitably cause corrosion in the air, rain or humid atmosphere after long-term use or use for many years.

07/31/2020

What kind of equipment is generally used in cold storage How to select the refrigeration equipment

The cost of cold storage with a refrigeration capacity of less than 60kw is relatively large. It is generally suitable for small cold storage and air conditioning units. The cost of such small cold storage within 100 square meters ranges from 30,000 to 100,000.

08/18/2020

How to clean the condenser of the central air-conditioning chiller

With the improvement of the quality of life of residents, the "new aristocratic" central air conditioners in air conditioners have also entered the homes of ordinary people from tall shopping malls and villas.

06/29/2020

Compression ratio of American Copeland compressor

09/22/2020

Compressed air purification equipment

Compressed air is the most important energy source in modern industry, but clean compressed air can show its advantages. Okmarts.com can provide you with a complete set of equipment from compressors to compressed air purification equipment.

09/03/2020

Preventive maintenance of compressor equipment

Compressor as a mechanical equipment, after a period of operation, due to wear, deformation, corrosion, blockage and other reasons to produce failures or failure precursors, so it is normal and necessary to repair.

08/18/2020

How to maintain the cooling tower

1. Replacement of fillers. Inferior fillers have weak rigidity, poor load-bearing capacity, and are easy to deform and fall loose, which will directly lead to poor cooling effect or loss of cooling capacity.

08/19/2020

Three-step strategy to extend the service life of chillers

After a year of non-stop operation of the chiller, more or less debris will be generated, and it will be attached to the evaporator, condenser, cooling tower water system or filter, and the refrigerant oil will also be contaminated,

06/20/2020

How good is the air conditioning dehumidification

Nowadays, the temperature of some air conditioners is set actively by the manufacturer during dehumidification. Under the dehumidification method of this type of air conditioner, the control circuit will first check the room temperature, and then set the operating temperature policy value. The setting value of the factory plan is usually the policy value of the operation arrival It is 2 degrees lower than the room temperature. If the setting is too high, the dehumidification effect is not significant. In order to prevent overheating and lowering the room temperature during dehumidification, this set value is usually judged. At this time, we do not need to set the temperature, just open the air conditioning dehumidification function.<img src="{{media url=&quot;How_good_is_the_air_conditioning_dehumidification.jpg&quot;}}" alt="" />