TOKY Relay RMA-80A400/a7e

06/29/2020

Several causes of compressor burning

02/27/2021

Debugging method of servo motor

Before wiring, initialize the parameters. On the control card: select the control method; clear the PID parameters; let the default enable signal turn off when the control card is powered on; save this state to ensure that the control card is in this state when it is powered on again.

08/16/2020

What are the influencing factors of the cooling speed of the cold storage system

1. The cold storage has a large loss of cold due to poor heat insulation or sealing performance 　　 Poor thermal insulation performance is due to insufficient insulation thickness of pipes, warehouse insulation walls, etc., and poor thermal insulation and thermal insulation effects.

06/14/2020

How much future does using water as refrigerant

How much future does using water as refrigerant Refrigeration technology is always developing in the direction of high efficiency and environmental protection, but is it very futuristic to use water as a refrigerant?

09/07/2020

Lubricant-Protector of Industrial Equipment

Reducing friction is one of the main purposes of lubricating oil. In addition, lubricating oil has other functions. For example, the lubricating oil film can prevent rust; prevent metal from being corroded; the lubricating oil can also play a cleaning role.

08/05/2020

What are the different ways that industrial chiller equipment can be lubricated

Everyone knows the principle of industrial chiller compressor. The compressor sucks the low-temperature and low-pressure refrigerant gas in the evaporator into the compressor body, passes through the compressor

07/16/2020

Compressor failure and elimination

The compressor is the heart of the refrigeration system. It sucks low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and discharges high-temperature and high-pressure refrigerant liquid to the exhaust pipe to provide power for the refrigeration cycle.

09/14/2020

Analysis of common failures of air-cooled compressors (1)

There are three common failures in the main components of air-cooled compressors: 1. Failure of the gas circuit system 2. Failure of the oil circuit system 3. Failure of the transmission mechanism. Do some system analysis below

08/20/2020

Debugging method of central air conditioning system

Before the central air conditioner is put into use, the entire system must be debugged. The commissioning of the central air-conditioning system can be divided into: cold water system, cooling system, terminal equipment and air-conditioning host.

09/19/2022

Top Circuit Breaker Brands

Circuit breakers are switching appliances that provide circuit overload and short-circuit protection.