COPAL Transmitter PG-75-353R-NAR1B
Type: Transmitter
Brand: COPAL
Type: Transmitter
Brand: COPAL
Type: Transmitter
Brand: COPAL
Danfoss Transmitter 060G3591
Adli Transmitter 4008.180.001
Huba Control Transmitter 699.916234245
HANNA Conductivity Meter HI98303
Dwyer Pressure Gauge MS-141
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
BANDO Belt STS S4.5M-504-200
Schneider Circuit Breaker LV432809
07/23/2020
Liquid hammer refers to the situation in which the refrigerant liquid or wet vapor is sucked into the compressor by the compressor due to the failure or insufficient heat absorption and evaporation of the refrigerant, which is called liquid hammer.<br></br> <br></br>
08/16/2023
As winter approaches, many homeowners are faced with the question of which heating system to choose for their home. The two most popular options are heat pumps and gas furnaces. Each has its own set of advantages and disadvantages.
06/14/2020
The throttling mechanism is one of the important components in the refrigeration device. Its function is to reduce the saturated liquid (or supercooled liquid) under the condensing pressure in the condenser or accumulator to the evaporating pressure and e 器2 䀀 ᅵ皥 䖒皦즠Ʋ煔क़ 㲈Ʋ 䌁皦 ᮔDž༬皧煞क़Ѐ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵 ᴴᏩ呄ᠾ퍘ᒥ 鹨់ᩄ ꋔྦ 瑉浥 巠皱㙲皦抐皱 巠皱 ੨皦柘皱 ᅵ皥 ب 巠皱㙲皦忈皱 ੨皦柘皱 즠Ʋǜ 勁皦즠Ʋب ǜ V / 펔B䌁皦
06/20/2020
Nowadays, the temperature of some air conditioners is set actively by the manufacturer during dehumidification. Under the dehumidification method of this type of air conditioner, the control circuit will first check the room temperature, and then set the operating temperature policy value. The setting value of the factory plan is usually the policy value of the operation arrival It is 2 degrees lower than the room temperature. If the setting is too high, the dehumidification effect is not significant. In order to prevent overheating and lowering the room temperature during dehumidification, this set value is usually judged. At this time, we do not need to set the temperature, just open the air conditioning dehumidification function.<img src="{{media url="How_good_is_the_air_conditioning_dehumidification.jpg"}}" alt="" />
07/31/2020
Air, moisture and impurities contained in the air will cause pressure increase, current increase, noise increase, and power consumption increase in the air conditioner system, which will reduce the cooling (heat) capacity, and may also cause ice blockage and dirty blockage.
03/02/2022
For a long time, due to the lack of understanding of air compressors by some enterprises
07/06/2022
A proportional valve provides a change in output pressure or flow in the same ratio as the change in the input, for example if the input doubles then the output will also double.
06/29/2020
Too small selection results in insufficient compressor displacement Many users just start not knowing the specific gas consumption of their own production, so they blindly select the model according to their own estimates, resulting in exhaust pressure not coming up, below the rated exhaust pressure, which cannot meet the normal gas consumption of the factory.
06/20/2020
The basic structure and working principle of single slide compressor.<img src="{{media url="Structure_diagram_of_single_vane_compressor_Main_features_of_single_vane_compressor.jpg"}}" alt="" /> Single sliding vane compressor is also called scraper compressor or rolling rotor compressor. Its structure is shown in Figure 3-7. A cylindrical eccentric rotor (also called a piston) is installed in the cylinder, and the center of rotation of the rotor coincides with the center of the cylinder. In the middle of the upper part of the cylinder, a scraper that can slide up and down is installed. Due to the force of the spring,<img src="{{media url="Structure_diagram_of_single_vane_compressor_Main_features_of_single_vane_compressor2.jpg"}}" alt="" />
06/23/2020
1.If it is because of the weather, you need to change the refrigerator to another location. 2. When used in winter, you can turn on a compensation switch in the refrigerator. 3. It is necessary to check whether the compressor is damaged. 4. If the modulation gear is incorrect, you can adjust the gear higher. 5. If the refrigerant is not enough, the problem of non-refrigeration can be solved after the fluorine content is added.