V.T.V Electric Motor YN90-40

08/02/2020

What to do when the cold storage is cooled for the first time

Before the cold storage is put into production, the installation and debugging of the low-temperature cold storage is a very important content. Only by debugging the temperature can the temperature in the cold storage be reduced to the temperature you need,

07/11/2024

Solenoid Valve Coil Overheating: Influence, Causes, and Solutions

As an electric control component, solenoid valves are widely used in many equipment such as robotic arms, CNC machine tools, and water heaters.

08/19/2020

How to judge whether the refrigeration equipment is working normally

The relevant valves and equipment in the refrigeration equipment system are in their proper state. The compressor suction and discharge valves, the inlet and outlet valves of the oil separator

08/28/2020

See the real chapter for details, small technology to solve big problems-talk about tunneling effect and its improvement

In the introduction of adsorption dryers, the term "tunneling effect" is often mentioned. So what exactly is "tunneling effect"? We call the phenomenon of uneven air distribution in the drying tower, rapid flow in the middle and slow flow at the edges as Rﰨ2䀀湠癒Vǜ

09/10/2020

Application of pressure sensor in air compressor control system

Take a single screw air compressor as an example to illustrate the working principle of an air compressor. The working process of a screw air compressor is divided into four processes: suction, sealing and conveying, compression and exhaust.

09/04/2020

How many do you know about the essential nine almighties in the bearing industry

1. Installation of bearing 　　 Whether the bearing is installed correctly or not affects the accuracy, life and performance. Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accordance with operating standards. The work standard items are usually as follows:

06/14/2020

Refrigerating oil use characteristics and performance requirements

Refrigerating machine oil is mainly used to lubricate the parts that need to be lubricated in the freezing machine, and is closely related to the running performance and service life of the compressor, so its selection and application are very important.

06/29/2020

How the compressor works

07/05/2020

Global HVAC Centrifugal Compressors Market 2020-2025 Report and Imapct of Coronavirus Pandemic

The “Portable Air Compressor” Market report considers the central point responsible for driving the development of the Snowblowers Industry, notwithstanding the key preventions and difficulties.

07/14/2020

Compressor operation requirements

Compressor operation requirements The first load operation of the compressor is carried out after the empty vehicle operation and purging are completed. The compressor should be operated according to the following requirements: