Atos Vane Pump PFED-43-045-016-3STA

07/25/2020

The influence of evaporating temperature on refrigeration system

Household air conditioners generally cannot adjust the evaporation temperature! The cold storage and other devices can be adjusted in small amounts, and the increase in the evaporation temperature is mainly in the design and manufacturing stage!

08/17/2020

Methods and Skills of Stable Operation of Water Chiller

When using the chiller, if the equipment often fails, it will threaten the normal operation of the equipment. As the main equipment to reduce the temperature of the space, the chiller needs to master the correct use method of the chiller before use.

08/20/2020

What are the requirements of the chiller for the performance of compressor lubricants

The refrigeration compressor is one of the most important components of the chiller, so the lubricating oil (also called refrigerating machine oil) it uses is very demanding.

09/08/2020

The basic theoretical knowledge of air that everyone who uses an air compressor should understand

1 What is air? What is normal air? 　　 Answer: The atmosphere around the earth, we are accustomed to call it air. 　　The air under the specified pressure of 0.1MPa, temperature of 20°C and relative humidity of 36% is normal air. Normal air is different from standard air in temperature and contains moisture. When there is moisture in the air, once the moisture is separated, the air volume will be reduced.

08/02/2020

Pay attention to these details when installing household central air conditioners!

Household central air-conditioning has gradually become one of the necessary conditions for modern home life. When choosing and installing central air-conditioning,

09/21/2020

10 steps to choose an air compressor

When building an air system, in addition to the purchase cost, how to save high-frequency electricity expenses? How to extend the life of the air machine? How to stabilize the air supply pressure? And how to reduce environmental noise and pollution? It is a problem that users expect to solve: how to correctly select an air compressor in the initial stage of setup plays a key factor.

09/07/2020

An article to fully understand the principle, failure and maintenance of nitrogen compressors

Nitrogen compressors are mainly used in various industrial needs. Pipes are used to connect the original air inlet of the nitrogen compressors and the balance gas tank. When the sealing performance of the sealing box is not very good, the pipeline provides a certain pressure ,

06/29/2020

Compression ratio of American Copeland compressor

09/11/2020

Bearings are classified according to whether they can be adjusted

Bearings can be divided into: 1. Self-aligning bearing: The raceway is spherical and can adapt to the angular deviation and angular movement between the axis of the two raceways. 2. Non-aligning bearings (rigid bearings): bearings that can resist the angular deviation of the axis between the raceways.

09/04/2020

The focus of Chinese manufacturing transformation and upgrading

Chinese manufacturing industry has achieved world-renowned achievements in the thirty years of reform and opening up. With the development of Internet technology, disruptive innovation in the manufacturing sector is not only difficult to predict,