Danfoss Expansion Valve 068Z3357

09/02/2020

The installation standards and requirements of the air compressor are indeed in place in detail!

1 Installation environment layout requirements 　　 In order to meet the needs of development, the computer room should have room for expansion in the position of the general map.

08/05/2020

Does the fresh air system need to be turned on for 24 hours

The fresh air system is an indoor ventilation product that can continuously discharge indoor dirty air 24 hours a day, introduce fresh outdoor air at the same time, and effectively control the air volume and increase energy recovery.

08/17/2023

Exploring the Pros and Cons of Portable Heat Pumps for Efficient Home Heating and Cooling

Portable heat pumps are becoming an increasingly popular option for homeowners who want to efficiently heat and cool their homes without the need for ductwork.

08/24/2020

Normal operating conditions of the refrigeration system in operation

1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature and 5-10℃ higher than the brine temperature;

08/29/2020

Compressed air technology is moving towards an era of high efficiency

Compressed air is the most widely used energy source in industry and commerce, in addition to electricity. Its wide application stems from its easy operation, fast speed, high power density, safety and good compatibility, but its higher cost cannot be ignored...

08/12/2020

Disassembly steps and installation precautions of central air conditioning

Air conditioners have been in our lives for a long time. The central air conditioners installed in some homes or other places may be very old. It is time to disassemble, repair, or replace them.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

07/16/2020

Why should the high and low temperature test chamber be debugged and calibrated?

In order for the high and low temperature test chamber to exert its maximum efficiency and stability in the hands of customers, the most important thing is to debug and calibrate the factory during the 15-day forward behavior period. The following are the three methods for calibrating the high and low temperature test chamber and their The advantages and disadvantages of

07/11/2020

Working principle structure diagram of screw air compressor

Working principle structure diagram of screw air compressor 1. The basic structure and working principle of screw air compressor The commonly known screw compressor refers to the twin screw compressor. The basic mechanism of screw compressor: In the body of the compressor, a pair of intermeshing spiral rotors are arranged in parallel.

06/14/2020

An accident analysis of refrigeration compressor

An accident analysis of refrigeration compressor A major refrigerator damage accident occurred in the refrigeration workshop of a meat joint processing plant. The refrigeration workshop of the factory was equipped with 2 single-stage two-stage ammonia re器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž