Eaton Moeller Circuit Breaker E6-10/3/D

03/17/2021

Several common faults in the spindle drive system of CNC machine tools and how to repair it?

When the vertical machining center supporting FANUC6 system is working, the machine tool vibrated severely, and the AC spindle drive displayed AL-04 alarm. During the vertical machining center supporting FANUC6 system is working, the machine tool vibrates severely, and the AC spindle drive displays AL-04 alarm.

06/14/2020

11 common protection devices for refrigeration compressors

11 common protection devices for refrigeration compressors When the compressor is running, some abnormal conditions may occur, such as: the discharge pressure is too high, the suction pressure is too low

08/21/2020

Treatment method of ammonia leakage accident in ammonia refrigeration compressor

During the operation of the cold storage, the maintenance and maintenance of the ammonia refrigeration system are not in place, which will cause some failures in the ammonia refrigeration system.

08/12/2020

Four steps in the use of parallel compressors in cold storage

The use of parallel compressors focuses on four issues, as follows: 　　①Keep the oil level 　　② Countermeasures for liquid flood back 　　③Protection device and accessory parts device 　　④Confirmation of piping stress

08/15/2020

How to achieve high efficiency of industrial refrigerators and cooling water towers

In many industries, the demand for industrial refrigerators is very large, especially those industries that require refrigeration to a certain temperature.

08/14/2020

Common problems and solutions of liquid refrigerants in refrigeration systems

1. Migration of liquid refrigerant<br></br> 　　 refrigerant migration refers to the accumulation of liquid refrigerant in the compressor crankcase when the compressor is stopped.

08/29/2020

Discussion on ways to reduce the design cost of air compressor

Reduce the friction between the end face of the crankshaft and the end face of the crankcase On the direct-coupled air compressor, the front end of the crankshaft adopts gear transmission, and the gears are divided into straight and helical teeth.

07/11/2020

working principle

working principle The screw compressor uses a pair of core-yin and yin rotors to realize the continuous suction, compression, and exhaust of air. The active rotor has a 5-spiral spiral, and the driven rotor has 6 tooth slots. It adopts a unique tooth shape to produce High compression efficiency.

04/15/2024

13 Common Servo Motor Faults: Causes and Troubleshooting Methods

Servo motor is a device that can convert electrical energy into mechanical energy. It can accurately control speed and position and is an important part of the servo system.

06/29/2020

Compression ratio of American Copeland compressor