Stroke: 1 mm - 200 mm
Piston diameter: 12 mm
Type code: ADNGF
Based on norm: ISO 21287
Cushioning: Elastic cushioning rings/pads at both ends
Mounting position: Any
Design: Piston: Profile barrel: Piston rod
Position sensing: For proximity sensor
Variants: Heat-resistant seals max. 120Celsius Degree: Through piston rod: Explosion protection certification (ATEX): Laser etched rating plate
Protection against torsion/guide: Guide rod with yoke
Operating pressure: 1.5 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: c T4
ATEX category for dust: II 2D
Type of (ignition) protection for dust: c 120Celsius Degree
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 21 (ATEX): Zone 1 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Impact energy in the end positions: 0.07 J
Theoretical force at 6 bar, retracting: 51 N
Theoretical force at 6 bar, advancing: 68 N
Moving mass at 0 mm stroke: 22 g
Additional weight per 10 mm stroke: 14 g
Basic weight with 0 mm stroke: 90 g
Additional moving mass per 10 mm stroke: 4 g
Pneumatic connection: M5
Note on materials: RoHS-compliant
Cover material: Aluminum: Anodized
Seals material: TPE-U(PUR)
Piston rod material: High-alloy steel
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized