1/2
Festo Air Cylinder DNC-100-75-PPV-A-KP
There is no price at present, you can Request a Quote
Maritime classification: See certificate
Stroke: 3 mm - 2000 mm
Piston diameter: 100 mm
Type code: DNC
Based on norm: ISO 15552
Cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Piston: Piston rod: Profile barrel
Position sensing: None: For proximity sensor
Variants: With end-position locking at both ends: Continuous, hollow piston rod: Monostable pneumatic valve, fitted on left, piston rod extended when not actuated: Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated: With front end-position locking: Temperature range -40 to 80 Celsius Degree: Through piston rod: Piston rod with external hexagon: Constant, slow movement: Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated: Increased service life: Extended external thread piston rod: With anti-twist protection: High corrosion protection: With rear end-position locking: Special thread on piston rod: Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated: Dust protection: Piston rod at one end: Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated: Clamping unit on the piston rod: Heat-resistant seals max. 120Celsius Degree: Monostable pneumatic valve, fitted on right, piston rod extended when not actuated: Internal thread on piston rod: Low friction: Extended piston rod
Protection against torsion/guide: Square piston rod
Operating pressure: 0.12 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 1 (ATEX): Zone 2 (ATEX): Zone 22 (ATEX): Zone 21 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 120 Celsius Degree
Impact energy in the end positions: 1.2 J
Max. torque for protection against rotation: 3 Nm
Theoretical force at 6 bar, retracting: 4418 N
Theoretical force at 6 bar, advancing: 4418 N - 4712 N
Type of mounting: With internal thread: With accessories
Pneumatic connection: G1/2
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized
Stroke: 3 mm - 2000 mm
Piston diameter: 100 mm
Type code: DNC
Based on norm: ISO 15552
Cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Piston: Piston rod: Profile barrel
Position sensing: None: For proximity sensor
Variants: With end-position locking at both ends: Continuous, hollow piston rod: Monostable pneumatic valve, fitted on left, piston rod extended when not actuated: Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated: With front end-position locking: Temperature range -40 to 80 Celsius Degree: Through piston rod: Piston rod with external hexagon: Constant, slow movement: Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated: Increased service life: Extended external thread piston rod: With anti-twist protection: High corrosion protection: With rear end-position locking: Special thread on piston rod: Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated: Dust protection: Piston rod at one end: Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated: Clamping unit on the piston rod: Heat-resistant seals max. 120Celsius Degree: Monostable pneumatic valve, fitted on right, piston rod extended when not actuated: Internal thread on piston rod: Low friction: Extended piston rod
Protection against torsion/guide: Square piston rod
Operating pressure: 0.12 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 1 (ATEX): Zone 2 (ATEX): Zone 22 (ATEX): Zone 21 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 120 Celsius Degree
Impact energy in the end positions: 1.2 J
Max. torque for protection against rotation: 3 Nm
Theoretical force at 6 bar, retracting: 4418 N
Theoretical force at 6 bar, advancing: 4418 N - 4712 N
Type of mounting: With internal thread: With accessories
Pneumatic connection: G1/2
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized
Ask questions
(0/1,200)
- Q: Can I place an order over the phone?
A: Yes, in some cases, you may be able to place an order over the phone. Please contact our customer service team and provide them with the necessary details to assist you with the phone order process.
- Q: How can I compare prices and reviews of similar products?
A: On the product list page, you can view the prices and ratings of different items simultaneously. You can also use filters to sort products by price or rating, facilitating your comparison and selection.
- Q: Can I place an order for an out-of-stock item?
A: If an item is currently out of stock, you may not be able to place an order for it. However, you can sign up for a notification to be informed when the item is back in stock.
Question has been sent successfully
Reviews
- A
Anonymous user
Nov 25, 2022
Festo Air Cylinder DNC-100-75-PPV-A-KPAll was ok! No problems whatsoever.HelpfulUnhelpful
Festo Air Cylinder DNC-100-75-PPV-A-KP
There is no price at present, you can Request a Quote
People who bought this item also viewed
AirTAC Air Cylinder JSI100X400S
US$336.41
Festo Air Cylinder DGP-32-500-PPV-A-B
US$568.68
Compact Air Cylinder QJ92-1642-A
US$1153.85
CKD Air Cylinder SCPG2-M-00-10-30
US$34.49
Festo Air Cylinder DNC-63-1200-PPV-A
US$442.31
Festo Air Cylinder DGC-32-700-KF-PPV-A
US$978.85
Festo Air Cylinder DGC-63-1600-KF-PPV-A
US$769.23
TPC Air Cylinder AQ2B40-25DM
US$91.15
Festo Air Cylinder DGO-16-100-PPV-A-P
US$551.92
Festo Air Cylinder DSBC-80-320-C-PPVA
US$764.62
Festo Air Cylinder DSBC-100-400-PPSA-N3
US$400.77
HENGSTLER Encoder AC58/0017EK.42SBD
US$682.30
SMC Solenoid Valve VQ5401-51
US$490.38
Johnson Controls Actuator M9206-BAB-2S
US$353.85
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
US$2307.69
Panasonic Servo Motor MHMF022L1V2M
US$653.85
Honeywell Solenoid Valve VE4025B1045
US$334.62
ROTEN Mechanical Seal 8E5K-22-X
US$384.62
SANDSUN Overload Pump VA08H-760
US$1568.40
GS Battery 6-QW-60(450)-(55D23L-KR)
US$646.15
Rechi Compressor 44R273A
US$341.00
MINDMAN Air Cylinder MCQV2-11-40-200
US$88.46
Mitsubishi Compressor YB645WTG
US$549.00
EZO Bearing SMR62Z
US$5.77
LG LS Contactor 1259005500 GMD-50 DC250V
Contact Us
Honeywell Actuator M7294Q1007/U
US$1423.08
Omron Sensor E2B-M12KN08-M1-B1
US$24.53
IFM Sensor O4E201
US$211.54
MAC Solenoid Valve 44B-ABA-GDCA-1BC
US$186.54
EATON Relay ESR5-NO-31-230VAC
US$442.31
