1/1
Festo Air Cylinder DNC-40-40-PPV-S6
There is no price at present, you can Request a Quote
Maritime classification: See certificate
Stroke: 2 mm - 2000 mm
Piston diameter: 40 mm
Type code: DNC
Based on norm: ISO 15552
Cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Piston: Piston rod: Profile barrel
Position sensing: For proximity sensor: None
Variants: Piston rod at one end: High corrosion protection: Special thread on piston rod: With end-position locking at both ends: Increased service life: Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated: Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated: Low friction: Continuous, hollow piston rod: With rear end-position locking: Monostable pneumatic valve, fitted on right, piston rod extended when not actuated: Heat-resistant seals max. 120Celsius Degree: Clamping unit on the piston rod: Constant, slow movement: Temperature range -40 to 80 Celsius Degree: Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated: With anti-twist protection: Extended piston rod: Dust protection: Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated: With front end-position locking: Internal thread on piston rod: Piston rod with external hexagon: Through piston rod: Extended external thread piston rod: Monostable pneumatic valve, fitted on left, piston rod extended when not actuated
Protection against torsion/guide: Square piston rod
Operating pressure: 0.2 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX): Zone 22 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 120 Celsius Degree
Impact energy in the end positions: 0.2 J
Max. torque for protection against rotation: 1.1 Nm
Theoretical force at 6 bar, retracting: 633 N
Theoretical force at 6 bar, advancing: 633 N - 754 N
Type of mounting: With internal thread: With accessories
Pneumatic connection: G1/4
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized
Stroke: 2 mm - 2000 mm
Piston diameter: 40 mm
Type code: DNC
Based on norm: ISO 15552
Cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Piston: Piston rod: Profile barrel
Position sensing: For proximity sensor: None
Variants: Piston rod at one end: High corrosion protection: Special thread on piston rod: With end-position locking at both ends: Increased service life: Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated: Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated: Low friction: Continuous, hollow piston rod: With rear end-position locking: Monostable pneumatic valve, fitted on right, piston rod extended when not actuated: Heat-resistant seals max. 120Celsius Degree: Clamping unit on the piston rod: Constant, slow movement: Temperature range -40 to 80 Celsius Degree: Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated: With anti-twist protection: Extended piston rod: Dust protection: Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated: With front end-position locking: Internal thread on piston rod: Piston rod with external hexagon: Through piston rod: Extended external thread piston rod: Monostable pneumatic valve, fitted on left, piston rod extended when not actuated
Protection against torsion/guide: Square piston rod
Operating pressure: 0.2 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 2 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX): Zone 22 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 120 Celsius Degree
Impact energy in the end positions: 0.2 J
Max. torque for protection against rotation: 1.1 Nm
Theoretical force at 6 bar, retracting: 633 N
Theoretical force at 6 bar, advancing: 633 N - 754 N
Type of mounting: With internal thread: With accessories
Pneumatic connection: G1/4
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized
Ask questions
(0/1,200)
- Q: How can I track the logistics information of a product?
A: Once your order is shipped, you will receive a confirmation email with tracking information. You can use this information to track your order through the logistics provider's website.
- Q: Can I pre-order items that are not yet released?
A: Yes, we may offer pre-order options for certain items that are not yet released. Pre-ordering allows you to secure your item in advance, and we will ship it to you as soon as it becomes available.
- Q: How can I provide suggestions for improving your services?
A: We value your feedback and suggestions for improving our services. You can provide suggestions by contacting our customer service team or using the feedback form on our website. We appreciate your input and strive to enhance our offerings based on customer suggestions.
Question has been sent successfully
Reviews
- A
Anonymous user
Nov 25, 2022
Festo Air Cylinder DNC-40-40-PPV-S6All was ok! No problems whatsoever.HelpfulUnhelpful
Festo Air Cylinder DNC-40-40-PPV-S6
There is no price at present, you can Request a Quote
People who bought this item also viewed
CKD Air Cylinder SCPG2-M-00-10-30
US$34.49
CKD Air Cylinder SCM-40D25
US$48.08
MINDMAN Air Cylinder MCJA-12-20-30
US$46.15
Festo Air Cylinder DGP-32-1950-PPV-AB-D2
US$1574.62
Festo Air Cylinder DSBG-32-25-PPVA-N3
US$604.23
CHANTO Air Cylinder KHF-16D1R
US$1125.38
Festo Air Cylinder DGC-8-200-KF-P-A
US$997.31
CHELIC Air Cylinder RTM15*270
US$42.31
F-TEC Air Cylinder KCXS10
US$1153.85
Renishaw Encoder RGH22Z50D00
US$2347.70
CKD Solenoid Valve 3PB219-00-B-3
US$115.38
Johnson Controls Actuator VA-7200-1001
US$653.85
SMC Proportional Valve ITV1050-042L
US$439.54
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
US$2307.69
Panasonic Servo Motor MHMF022L1V2M
US$653.85
Honeywell Solenoid Valve VE4025B1045
US$334.62
ROTEN Mechanical Seal 8E5K-22-X
US$384.62
SANDSUN Overload Pump VA08H-760
US$1568.40
GS Battery 6-QW-60(450)-(55D23L-KR)
US$646.15
Rechi Compressor 44R273A
US$341.00
MINDMAN Air Cylinder MCQV2-11-40-200
US$88.46
Mitsubishi Compressor YB645WTG
US$549.00
E+H Flowmeter 10W25-UA0A1AAOA1AA
US$384.62
Neuma Solenoid Valve NVA-8532-A1
Contact Us
Copeland Compressor ZB78KCP-TF5-950
Contact Us
Fanuc Servo Drive Module A20B-0003-0310
US$5899.50
Tecumseh Compressor AEZ4430Y-FZ1A
US$281.48
Fuji VFD Frequency Converter FRN55F1S-2C912
Contact Us
Baumer Encoder GXMMW.A205PA2
US$1884.62
