GUOMAO Reduction Drive Gearbox Speed Reducer B2-3.0KW

06/29/2020

Introduction of measures for compressor pressure protection

Introduction of measures for compressor pressure protection Measures for compressor pressure protection include the following: 1. Control of suction and exhaust pressure When the compressor is running, due to the system or the compressor itself, the discharge pressure may be too high or the suction pressure may be too low. For this reason, the suction and discharge pressures need to be controlled.

07/04/2020

How important is the air conditioning compressor for air conditioning

How important is the air conditioning compressor for air conditioning As the earth we live in enters summer, the summer in many places is uncomfortably hot, so a good summer cool companion to accompany them is-air conditioning. Air conditioning has become a good weapon for us to spend the summer.

01/13/2021

The reason for the high pressure of the condenser what is the phenomenon of the condenser being blocked The-reason-for-the-high-pressure-of

The-reason-for-the-high-pressure-of Components of the condenser system 　　Refrigeration After the liquid refrigerant absorbs the heat of the cooled object in the evaporator, it vaporizes into high-temperature and low-pressure steam, is sucked in by t器2䀀
ￜ皥
䖒皦즠Ʋ㎄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㎎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧ن識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

09/22/2020

The development history of single screw machine

1. The history and current situation of single screw compressor 　　 In 1960, France's B. Zimmern proposed the idea of ​​a single screw compressor and obtained a patent. In 1962, the first prototype was trial-produced, and it was officially produced and put on the market by Peugeot in the early 1970s.

09/02/2020

Troubleshooting and treatment of common faults of solenoid valve of air compressor

Solenoid valve is one of the common air compressor accessories, which can be used to connect or cut off the air source in production, thereby switching the pneumatic control membrane head air circuit.

08/12/2020

Matters needing attention when choosing evaporator for chiller

The evaporator is one of the four major components of the refrigeration system, and it is the ultimate manifestation of the cooling effect and efficiency. The evaporator is generally designed and equipped by the chiller manufacturer

09/08/2020

The difference between air-cooled and water-cooled screw air compressors

The difference between air-cooled screw machine and water-cooled screw machine: 　　The oil cooler of the air-cooled screw compressor and the compressed air after-cooler are made into one body. It is an aluminum plate-fin structure and brazed in a vacuum furnace. Once the oil leaks, it is almost irreparable and only replaced. The working principle is that hot oil and high temperature (about 80℃) gas flow in their respective pipes,

06/14/2020

Common failure phenomena of air-conditioning compressor

If your home's air conditioner is not cooling, it is likely that the compressor has malfunctioned. Why do you say this? Since the compressor is different from non-moving parts such as condensers and evaporators, it needs to run at high speed during system器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱

08/15/2020

Failure Forms and Preventive Measures of Parts of Shell and Tube Heat Exchanger

1. The structure of the shell and tube heat exchanger<br></br> The shell and tube heat exchanger is a traditional and most widely used heat exchange equipment. Because it has a strong structure and can be made of a variety of materials