HITACHI VFD Frequency Converter SJ700-450LFF2

03/14/2021

Function of servo drive

Regeneration and dynamic braking function; Instant power down protection function for quick shutdown;

09/01/2022

What is a Magnetic Contactor?

In many cases, the magnetic contactor is simply referred to as a contactor. It is an electrical appliance that uses the current flowing through the coil to generate a magnetic field to close the contacts to control the load in industrial electricity.

09/11/2020

Inverter companies will transform to personalized services

Recently, the Institute of Industry and Market Research of the Institute of Machinery Industry Information said that my country's inverter market will not be saturated until at least 10 years, and the overall market potential is 120 billion to 180 billion yuan.

06/20/2020

What are the causes of air conditioning trip

What are the causes of air conditioning trip 1. The contradiction between the rated current of the air conditioner and the current carrying capacity of the wire. 　　Here are two formulas involved: 　　①The rated current of air conditioner I=P÷U ÷power factor, the power remains unchanged, the smaller the voltage, the greater the current required. 　　② The current carrying capacity of the wire I=U÷R, the voltage is proportional to the current. 　　 So when the power supply voltage is normal, we must consider the line voltage drop. The longer the line, the greater the resistance, the greater the voltage drop, and the smaller the output current at the end. However, because the power of the load remains unchanged, the voltage becomes smaller, and the current that needs to be output will be larger. At this time, the wire is forced to overload, and the time will cause heating, and eventually cause the tripping of the open circuit. 　　 Some friends said that the heat of the wire will not cause the tripping of the circuit breaker. In fact, the manufacturer of the air switch has made it clear in the relevant manuals that the heat of the wire will cause the air switch to trip. Because the wire heats up, the crimp terminal will also heat up, and the resistance will become larger and larger. The larger the resistance, the greater the current consumption, and the hotter it will be, a vicious cycle. 　　 2. Leakage 　　During the daily maintenance work, we will encounter the situation that the air circuit trips due to the leakage of electricity. At least I have not experienced it once or twice. Regardless of the leakage of the neutral line or the leakage of the live line, a long time will cause the circuit breaker to trip. 　　Why does the electric leakage cause the MCB to trip? There are two situations. 　　 ① Good grounding. At the beginning, the leakage current was not large, and as time went by, the leakage current became larger and larger, and eventually evolved into a short circuit to ground, unable to close. 　　②There is no ground wire. If the equipment is not connected to the protective ground, when the wire leaks to the equipment, it is equivalent to adding a large shunt resistance. Like this problem, if the air conditioner does not have a ground wire, when the wire leaks to the air conditioner, the air conditioner is a very large shunt resistor and will consume a lot of current. Eventually, the wire will heat up or trip open. 　　How to determine whether the trip caused by the above two aspects can be done with a clamp ammeter. 　　 ① Measure the voltage at the input and output to see if there is a significant change in voltage drop. 　　②Measure whether the output current exceeds the standard. 　　 So my suggestion is: first measure the supply voltage to see if it is within the allowable fluctuation range. Then measure the current to see if it exceeds the rated ampacity of the wire. Finally, check the data one by one according to the measured data to find out the reason.

05/16/2023

Why Does My AC Compressor Shut Off After 2-3 Minutes?

In the hot summer, the air conditioner is one of the necessary cooling appliances. When we use the air conditioner in normal times, we should perform maintenance on it from time to time, so as to reduce the failure rate.

06/03/2025

Reasons and necessity of overhaul of oil-injected twin-screw air compressor

The structure of the main engine (also known as the head) of an oil-injected twin-screw air compressor is usually composed of a pair of mutually meshing screws, main engine casing, high-pressure end and end cover, and low-pressure end and end cover.

12/21/2023

AC Fan Won't Turn off (Troubleshooting Guide)

The air conditioning system can be a true lifesaver during sweltering summers and chilling winters, providing comfort and respite from extreme temperatures.

09/10/2020

Air compressor lubricant performance requirements

1. High quality base oil 　　 The base oil of compressor oil can be divided into two categories: mineral oil type and synthetic oil type. The production of mineral oil-type compressor oil is generally obtained by solvent refining, solvent dewaxing, hydrogenation or clay supplement refining to obtain the base oil, and then add a variety of additives to blend.

08/18/2020

Several safety protection methods for compressors in industrial chillers

In industrial chillers, the quality of the compressor determines whether the working efficiency of the chiller is good. At the same time, the compressor also plays an important role in the future after-sales maintenance of the chiller.

06/29/2020

Several causes of compressor burning