IMI Norgren Solenoid Valve V61R517A-A2000A

07/01/2020

How is the absorption refrigeration cycle of Taikang compressor

How is the absorption refrigeration cycle of Taikang compressor Taikang compressor is different from other brands of compressors, this feature is the absorption refrigeration cycle. Many people may not understand what is the absorption wet cooling cycle, it is composed of generator, absorber, condenser, evaporator, solution pump and restrictor.

09/06/2020

Why choose a frequency conversion air compressor Count the protection of the inverter to the motor

During the production and use of air compressor motors, improper operation often causes damage to the motor, which not only loses money, but also has a greater impact on the production schedule.

08/09/2020

How to debug the small cold storage during installation

1. Installation technology of expansion valve for small cold storage 　　 1. Check whether the temperature sensor is in good condition before installation; 　　2. The installation position of the expansion valve must be close to the evaporator, and the valve body should be installed vertically, not inclined or upside down;

09/07/2020

The demand list of the air compressor industry is for newcomers who will enter the industry after the year

After the Chinese New Year, another group of newcomers joined the compressor industry. Maybe they still don't know where the compressor can be used and to whom. In fact, screw air compressor equipment is widely used and can be used in almost every industry.

08/05/2020

The eight most taboo points of using a freezer

The eight most taboo points when using a freezer, such as the location and environment of the freezer, the temperature of the freezer varies in different seasons, but it is most avoided to tilt.

11/08/2023

Radiator Fan Replacement Cost: Factors to Consider

The radiator fan plays a crucial role in maintaining optimal engine temperature by assisting in heat dissipation. However, like any automotive component, it can fail over time due to wear and tear or other issues.

06/29/2020

How the compressor works

08/08/2020

Detailed explanation of multi-line air conditioning installation 3 times 5 key 8 steps specification

Detailed explanation of multi-line air conditioning installation 3 times 5 key 8 steps specification It’s not an exaggeration to say that the central air conditioner is installed with 3 points and 7 points for quality.

01/29/2025

FANUC spindle drive repair fault treatment

FANUC spindle drive maintenance problems mainly appear as stalls, abnormal speeds, motor oscillations, jitter during processing, and main circuit overcurrent alarms. Compared with AC FANUC spindle drive maintenance problems, the primary manifestations are motor overvoltage, fuse blown, etc.

03/03/2021

Control mode of servo motor

Torque control: the torque control mode is to set the external output torque of the motor shaft through the input of external analog quantity or the assignment of direct address. For example, if 10V corresponds to 5nm, when the external analog quantity is set to 5V, the output of the motor shaft is 2.5nm: if the load of the motor shaft is lower than 2.5nm, the motor will rotate forward, and when the external load is equal to 2.5nm