Littelfuse Fuse 0467005.NR

08/07/2020

What are the selection criteria for electronic valves in cold storage systems

The selection of all components in the cold storage refrigeration system must strictly comply with the four basic principles of safety, reliability, applicability and economy.

08/24/2020

Normal operating conditions of the refrigeration system in operation

1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature and 5-10℃ higher than the brine temperature;

08/19/2020

What should I do if the freezer trips

Tripping when the freezer starts is a problem that many users may encounter when using the freezer for the first time. Domestic refrigerators are widely used. Although domestic refrigerators have high performance,

08/20/2020

What is an air conditioner pressure sensor

The pressure sensor is a device that is installed on the pipeline of the outdoor unit of the air conditioner to perform pressure detection. The pressure detection result is transmitted to the computer board to control other parts of the air conditioner.

06/14/2020

Characteristics of rolling rotor compressor

Characteristics of rolling rotor compressor (1) Rolling rotor rotary compressor is a commonly used compressor for room air conditioners (2) Compared with the reciprocating piston compressor, it has the following characteristics:

08/02/2020

Treatment method after load damage of screw chiller

First of all, we must confirm whether the compressor load has been burned or the components have been worn away. If so, the refrigerant system will inevitably be contaminated. For example, residual refrigerant oil remains in the pipeline after carbonization

06/29/2020

How the compressor works

08/18/2020

How to use low temperature chiller to improve the cooling effect of air cooler

Generally, air coolers are installed outdoors. Therefore, the water temperature of the water storage tray will rise under the high temperature radiation of the scorching sun, which seriously affects the cooling effect.

09/04/2021

Where is the Throttle Position Sensor Located?

The throttle Position Sensor (TPS), located on the butterfly spindle, is operated by the throttle, and its installation varies according to the structure.

01/19/2023

The Differences between Solenoid Valves and Motorized Valves

The solenoid valve is an industrial equipment controlled by electromagnetic, which is the basic component of automation used to control fluid.