Tube I.D. (mm): 40
Medium: Air
Operating pressure range Double acting:0.02-1 MPa, Single acting:0.1-1 MPa
Proof pressure: 1.5 MPa
Ambient temperature: -5 degrees-+60 degrees(No freezing)
Available speed range: 50-500 mm/sec
Sensor switch: RCB, RCE, RCE1, RDEP
MINDMAN Air Cylinder MCJT-11-40-55
People who bought this item also viewed
AirTAC Air Cylinder SC160X350S
Compact Air Cylinder SD34X12
CHANTO Air Cylinder DXSL20X15
MINDMAN Air Cylinder MCSH-6-5
MINDMAN Air Cylinder MCJQ2-12-20-10M
SHAKO Air Cylinder PC25B125-C
CHANTO Air Cylinder ASR150X175
CKD Air Cylinder SSD-KL-16-50
Festo Air Cylinder DSM-25-270-CC-FW-A-B
HENGSTLER Encoder RI58-D/5000EF.47RD
Honeywell Solenoid Valve V5055A1004
Honeywell Actuator SM7428
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
STNC Air Cylinder TGC63X125
TYCO Relay MT323012
Recent related posts
-
08/18/2020
Common problems during debugging of refrigeration and air conditioning systems
The refrigeration and air-conditioning system is large in scale, with many equipment and variable working conditions, but the design, construction, debugging and management operation level is limited,
-
06/20/2020
Common faults and maintenance of air compressor
Common faults and maintenance of air compressor <img src="{{media url="Common_faults_and_maintenance_of_air_compressor.jpg"}}" alt="" /> Common faults and maintenance of air compressor Air compressors are widely used in various industries with the development of technology, but no matter what type of air compressor, there will be some problems in the process of use. The following editors will now introduce some common faults and maintenance methods, let's take a look.
-
06/19/2020
Application advantages and working process analysis of air energy heat pump
Air energy heat pump is to use the energy in the air to generate heat energy. It can provide 24 hours a day with large water volume, high water pressure and constant temperature to provide the family with different hot water, cooling and heating needs, and at the same time can meet the above requirements with the least energy consumption.<img src="{{media url="Application_advantages_and_working_process_analysis_of_air_energy_heat_pump.jpg"}}" alt="" />
-
08/02/2020
Refrigerator refrigeration system leak detection
The refrigeration system should be tested for leaks due to refrigerant leakage or refrigerators after replacing parts. The following three methods are generally used for leak detection in refrigeration systems
-
06/13/2020
The difference between single and twin screw compressors is reflected in the following 6 aspects
The difference between single and twin screw compressors is reflected in the following 6 aspects
-
06/20/2020
Common failure and analysis of centrifugal air compressor
Common failure and analysis of centrifugal air compressor 1. Abnormal vibration and noise: ① Misalignment ② The compressor rotor is unbalanced ③ The impeller is damaged ④ The bearing is abnormal ⑤ The coupling is faulty or unbalanced ⑥ The sealing ring is bad ⑦ The oil pressure and oil temperature are abnormal ⑧ There is dirt in the oil Clean, wear out the bearing ⑨ Surge ⑩ The stress of the gas pipeline is transmitted to the casing, which causes misalignment ⑪ There is a machine working near the compressor<img src="{{media url="Common_failure_and_analysis_of_centrifugal_air_compressor.jpg"}}" alt="" />
-
06/20/2020
[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high
[Experience] What happens if the compressor suction pressure is too high and the discharge pressure is too high Compressor suction pressure is too high, discharge pressure is too high 1. Too much refrigerant. Too much refrigerant will cause the suction pressure and discharge pressure to be too high at the same time. This is because when too much refrigerant fills the reservoir, it will occupy a part of the condenser volume, reducing the heat dissipation area and causing the condenser Poor condensation. Discharge excess refrigerant from the low-pressure side.
-
04/02/2024
Top Ten Industrial Robot Manufacturers Worldwide
The following are the top ten industrial robot manufacturers in the world, as well as their advantages, disadvantages and market share
-
04/16/2024
Servo Motor Overheating: Causes and Solutions
Servo motors are used in many industries in our lives. Some common problems and solutions about servo motors are also of great concern to everyone.
-
06/15/2020
Martin Rossen new global head of public affairs and communication at Danfoss
Martin Rossen will join Danfoss as Senior Vice President, Group Communication & Reputation 1st November, 2020, where he will be responsible for Danfoss’ global public affairs and communication activities. As of 1st November 2020, Martin Rossen takes on t 器2 䀀 ᅵ皥 䖒皦즠Ʋ㉄ᰙ 㲈Ʋ 䌁皦 ᮔDž༬皧㉎ᰙЀ 呄ᠾ鹨់༹皧 ࠄ 00령ꐱ댁珵뛐珵Љ 䕄ྦ 뤂ᐱ뚜珵