NSK Bearing NN 3024 TBCC1P5

09/07/2020

Do you know how the model designation of the air compressor comes from

Four basic marking methods 　　 1. Use motor horsepower to express: This was still feasible when the air compressor technology was not developed in the early days. However, with the continuous development of technology, even if the same motor is used now,

09/15/2020

Comparison of scroll compressor and rolling rotor compressor

With the development of society, human beings have higher and higher requirements for the comfort of the living environment. Therefore, improving the compression efficiency and working reliability of the compressor, developing and applying material-saving and energy-saving compressors have become one of the main directions for the development of refrigeration technology.

07/21/2020

11 common protection devices for refrigeration compressors

When the compressor is running, some abnormal conditions may occur, such as: exhaust pressure is too high, suction pressure is too low, oil pressure is insufficient, motor is overheated, excess liquid enters the cylinder, etc. In the event of an abnormal situation, the compressor will be damaged if there is no protective measure.

06/29/2020

Compression ratio of American Copeland compressor

09/10/2020

Advantages of air compressor equipped with permanent magnet synchronous motor

1. High efficiency The high efficiency mentioned here does not only mean that the efficiency of the rated power point is higher than that of the ordinary three-phase asynchronous frequency modulation motor, but refers to its average efficiency in the entire speed range. The excitation field of the permanent magnet synchronous motor is provided by the permanent magnet.

08/20/2020

How to maximize energy saving of industrial chillers

1. Industrial water chillers prevent and reduce pipeline fouling to improve the heat exchange efficiency of condensers and evaporators. If water treatment is not done well, calcium

09/21/2020

Calculation and determination of gas consumption

The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m3/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor

07/16/2020

Tips for compressors using refrigeration oil

The amount of frozen oil used. The amount of refrigerating oil should be controlled after the installation of the overall refrigeration system. After the trial operation, the oil return position of the refrigerating oil seen from the sight glass of the compressor should be at the center line of the sight glass.

11/15/2022

How to Make an Industrial Fan Quiet?

In construction machinery, fans are an important noise source. The cooling of the machine requires a lot of airflow, which directly causes the fan to generate high noise.

06/14/2020

Is it necessary to replace the refrigerator compressor? How much does it cost to replace the refrigerator compressor?

The refrigerator is a good helper in everyone's life, the main function is to keep food fresh, and then the freezing area can also enlarge the ice cream and ice cream that you like to eat in summer. But when the refrigerator compressor is broken, it is ve器2䀀
ￜ皥
䖒皦즠Ʋ焬क़㲈Ʋ
䌁皦
ᮔDž༬皧然क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱