The Parker Proportional Valve is high quality!
Operating Temperature: 0 - +50 degrees centigrade
Maximum Fluid Temperature: 50 degrees centigrade
Minimum Fluid Temperature: 0 degrees centigrade
Inlet Pressure Rating: 1 - 21 bar
Outlet Pressure Rating: 0.05 - 20 bar
Hysteresis: +/- 50 (factory set up) mbar
Input Voltage: 24 VDC (+/- 15 %, max. ripple 1)
Power Consumption: Max. 2.8 (at 24 VDC) W
Maximum Flow Rate: 150 / 2700 m3/hour
Safety Features: In case of control signal failure or if it is less than 50mV,
the regulated pressure drops automatically to 0 bar (atmospheric pressure).
In case of voltage supply failure, the regulated pressure will be kept constant.
Electrical Connection: M12 - 8 pin; 4 x 0.34 mm2 for power supply / M12 - 5 pin; 5 x 0.34mm2 for communication control
Operational Life: greater than 20 Million changes of control signal steps
Mounting Type: any position (recommended: upright; electronic part on top)
Vibration Resistance: 30g
Ingress Protection Rating: IP65
Materials of Construction: Silicone free
Specifications Met: EN 61000-6-1: 2001 | EN 61000-6-2: 2001 | EN 61000-6-3: 2001 | EN61000-6-4: 2001
For Fluid Type: Lubricated & Non-Lubricated Air and Neutral Gases
Filter Efficiency Rating: 50
Air Consumption: 0 (at constant control signal) SCFM
ATEX Specifications Met: No
Options: -
Configuration: Configurable