Sanyo Denki Servo Drive RS1L01AZA00

09/23/2022

Structural Characteristics of Gear Pump and Its Working Principle

Gear pump is a kind of hydraulic pump widely used in hydraulic systems. It is generally made into a fixed displacement pump.

08/09/2020

Can you answer these common basic knowledge questions about refrigeration compressors?

1. Why should the compressor run continuously for at least 5 minutes, and stop for at least 3 minutes after shutting down before restarting?

08/11/2020

Pay attention to these details. The air energy heat pump can be used for more than 10 years.

In a few months, the northern heating season will officially begin. In addition to central heating, this year's "coal-to-electricity conversion" has also received much attention.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

07/31/2020

What to do if the compressor of screw chiller is damaged

The compressor is the core component of the chiller. Damage to the compressor is a serious fault and needs to be dealt with in time, otherwise the chiller will not work. Today, the editor will introduce the knowledge and process of handling damaged screw compressors.

08/16/2020

Analysis of development obstacles and related factors of hydrodynamic energy-saving cooling water towers

According to industry insiders from energy-saving cooling tower manufacturers, according to the relative flow of water and air in the filler, energy-saving cooling towers are divided into two types, counter-flow and cross-flow, with round and square shapes.

06/14/2020

Frequently asked questions about refrigeration compressors Do you know these?

1. Why control the impurity content and moisture content of the compressor and air conditioning system?

03/02/2021

Related technical terms

1.Positioning or residual torque: when there is no current passing through the winding, the torque required to make the output shaft of the motor rotate. 2.Driver: an electrical control device used to run the stepping motor. This includes power supply, logic programmer, switching element and a variable frequency pulse source which determines the step rate. 3.Dynamic torque: the torque produced by the motor at a certain step rate. The dynamic torque can be expressed by PULL IN torque or PULL OUT torque.

07/18/2020

Explanation of the excellent performance of each component of the screw chiller

　The application of screw refrigeration compressors is becoming more and more common, and some of them have entered the period of frequent failures. When the abrasion of the female and male rotors, body, and exhaust end seat of the refrigeration compressor reaches above 0.65rnm, vibration will occur when the refrigeration compressor is running, the sound is abnormal, the cooling capacity is reduced, and the compressor cannot work normally.

09/04/2020

The advantages of air compressor asynchronous motor over traditional permanent magnet motor

The asynchronous motor is a three-phase induction motor, not the rare earth permanent magnet motor used in traditional electric vehicles. What are the reasons for this? The difference between induction motors and permanent magnet motors.