Schneider Circuit Breaker BDA34020Y

08/19/2020

What are the tips for purchasing a screw chiller for the first time

Screw chiller is named screw chiller because of its key component-the compressor adopts screw type. The state of the unit from the evaporator is gas refrigerant; after adiabatic compression by the compressor, it becomes a high temperature and high pressure state.

03/01/2022

Introduction to the Principle, Types and Advantages of Gas Sensors

The gas sensor is used to detect specific gases in a certain area and continuously measure the concentration of gases as well.

01/16/2023

What is a Variable Valve Timing Solenoid?

The variable valve timing (VVT) solenoid is a component of the variable valve timing system. It adjusts oil flow based on engine speed and load.

06/29/2020

Compression ratio of American Copeland compressor

07/18/2020

A coup to avoid the oil return problem of the refrigeration compressor of the piston chiller

Compressor: It is a complex machine running at high speed. Ensuring adequate lubrication of moving parts such as compressor crankshafts, bearings, connecting rods, pistons, etc. is the basic requirement for maintaining the normal operation of the machine. For this reason, compressor manufacturers require the use of specified grades of lubricating oil, and require regular inspection of the lubricating oil level and color

08/20/2020

What are the factors that affect the cooling capacity of the chiller

A normal running chiller will always encounter a series of small problems after working for a period of time. The following is a brief description of the problem that affects the cooling capacity of the chiller. The influencing factors are as follows:

09/10/2020

The actual displacement of the screw compressor is affected by those factors

1) Leakage. There is no contact between the rotors and between the rotor and the housing during operation, and a certain gap is maintained, so gas leakage will occur. When the pressure increased gas leaks to the suction pipe and the sucking groove through the gap, the exhaust volume will be reduced.

09/04/2020

Oil filter of air compressor oil circuit component function description

The oil filter is a paper filter whose function is to remove impurities in the oil, such as metal particles, oil deterioration, etc., with a filtration accuracy of 5-10μ, and it has a perfect protective effect on the bearing and rotor.

08/11/2020

Four major issues to be considered in the cold storage design process

1. Cold storage volume<br></br> 　　The size of the cold storage should be calculated based on the volume that the stored products must occupy in the cold storage, plus the aisles between rows, the space between the stack and the wall, ceiling

08/11/2020

Precautions for power distribution of screw chillers

1. After the screw chiller arrives at the customer site, it is necessary to connect the power cord to the unit control cabinet. The inlet of the control cabinet is above the control cabinet.