SECO Tool for Metal Cutting TNMG160408-MF1 CP200

08/07/2020

How to deal with the problem of non-circulation of cold water in the chiller

Generally speaking, a small industrial chiller already contains a cold water circulating pump, and a chiller (large) does not contain a cold water circulating pump.

08/14/2020

Four major reasons for the reduction of efficiency in the use of industrial chillers

Industrial chillers are often inefficient when they are in use, and there are many reasons for this phenomenon. Not only because of the environment in the chiller factory, but also because of the loss of components when the equipment itself is used for a long time

07/26/2020

The influence of temperature on refrigeration compressor

In summer, the discharge temperature of the compressor is relatively high and cannot be touched by hands. According to national standards, the exhaust temperature of the R22 refrigeration system should not exceed 150 degrees Celsius.

08/25/2020

For an air conditioner with a heating power of 1390W+1050W, what is the power consumption for 1 hour of heating

Time flies, the air conditioner has just been out of service for two months, and it’s time to start using it again. With air-conditioning, our biggest concern is power consumption. After all, everyone is not rich.

01/19/2023

The Differences between Solenoid Valves and Motorized Valves

The solenoid valve is an industrial equipment controlled by electromagnetic, which is the basic component of automation used to control fluid.

09/05/2020

The technical core that affects the development and use of cold dryers

The application of refrigeration dryers is very extensive. This article is to describe the core technology, important fields and development directions of refrigeration dryers to describe the core of the technology that affects the development and use of refrigeration dryers.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

09/07/2020

How to save energy in the dryer in the compressed air purification system

In many industrial occasions, compressed air systems have very high requirements for the water content of compressed air, such as: chemical, pharmaceutical, spraying, power electronics and other industries;

11/21/2024

Types of EGR Valves with Working Principle Diagrams

The EGR (Exhaust Gas Recirculation) valve is a device used to reduce diesel engine emissions. It can send part of the exhaust gas back into the intake passage, thereby reducing the generation of nitrogen oxides (NOx).

09/08/2020

Air compressor solenoid valve function

Solenoid valves are the basic components of automation used to control fluids and belong to experimental devices. Solenoid valves are not limited to hydraulic or pneumatic; solenoid valves for air compressors are usually used in industrial control systems to adjust the direction, flow, speed, on-off and Other parameters.