SG7I15GA SPG Motor I. General Specifications Poles and Type: The SG7I15GA is a 1 - pole, single - phase induction motor. Its single - pole design affects its rotational characteristics and performance. Power Supply: It operates with a single - phase voltage of 100V and a frequency of 50Hz, making it suitable for electrical systems with these specifications. II. Performance Metrics Duty: Rated for continuous duty (Cont. S1), this motor can run steadily for long periods, ideal for applications requiring consistent operation. Rated Load: The rated current is 0.37A, the rated speed is 1250r/min, and the rated torque is 1.10 kgf·cm (110 mN·m). These values represent the motor's performance under normal operating conditions. Starting Torque: It has a starting torque of 0.80 kgf·cm (80 mN·m), which helps the motor start smoothly even under load. Capacitor: It uses a 5.5μF capacitor rated at 250V, which plays a key role in the motor's electrical operation, especially for starting and maintaining speed. III. Protection and Certification Degree of Protection: With an IP23 protection rating, it is protected against solid objects larger than 12.5mm and water spray within a 15 - degree angle from the vertical, suitable for various working environments. Insulation Classification: The insulation classification is B(130), indicating that the insulation can withstand a maximum temperature of 130°C, ensuring reliable performance and safety. Protected Type: It is thermally - protected (T.P.). Also, all models in the SG series, including the SG7I15GA, have obtained UL, TÜV, and CCC certifications, guaranteeing quality and compliance with safety standards.