Application field UTP LEDURIT 60 is universally applicable on parts predominantly subject to grinding abrasion combined with light impact, such as conveyor screws, digging teeth, sand pumps and mixer wings. It is also suited as a final layer on tough-hard deposits (UTP DUR 600) or high Mn-steel (UTP BMC). Welding properties UTP LEDURIT 60 has excellent welding characteristics and a very easy slag removal. The homogeneous and finely rippled seam surface does, for most applications, not require any finishing by grinding. Hardness of the pure weld metal approx. 60 HRC 1 layer on steel with C = 0,15 % approx. 55 HRC 1 layer on high Mn-steel approx. 52 HRC