Baumer Sensor CKAK 12P3103

08/24/2020

Reason analysis of refrigeration compressor can not start or stop soon after start

1) First check the main circuit. Whether the power supply has power, whether the voltage is normal, whether the fuse has been blown due to starting overload, whether the air switch has tripped, whether the switch contacts are good, and whether the power supply is missing phase. Observe the voltmeter and ammeter when starting. When the small-scale refrigeration and air-conditioning equipment does not have an ammeter or electric meter, a multimeter or electric pen can be used to check the power supply. When the power supply voltage is too low, the compressor will not start.

08/15/2020

Simple treatment method after the refrigeration system enters water

Since the chiller has a water system, there is a possibility that the refrigerant system may enter water when it is used improperly. Therefore, a process guide is formulated for the problem of water ingress

08/19/2020

Tips for quick air conditioning

1: The press does not start, there is no problem with the temperature setting, but there is no response after power on<br></br> 　　 The compressor does not turn, the fan turns, you must first look at the capacitor

06/29/2020

Several causes of compressor burning

08/16/2020

How to improve the service life of the regulating valve

The control valve is not like a manual valve. After it is installed, it is rarely managed and maintained. It must be maintained frequently to ensure normal operation and long service life. Below we introduce eight ways to extend the service life of the control valve.

07/16/2020

Vacuum leak test method for small cold storage equipment

Refrigeration systems with evaporating pressure gauges close to or below atmospheric pressure must be tested for vacuum leak tests, leaving the refrigeration equipment under proper vacuum for a certain period of time, reflecting and observing whether air has penetrated into the system from the reading of the vacuum pressure gauge for inspection The sealing performance of the cold storage equipment system.

09/09/2020

Effective methods to improve the knowledge level of China's dryer technology and drying equipment

The drying equipment industry is engaged in the development of small businesses, new products, and perfect introduction of new products mainly to imitate each other. It is recommended to develop advanced technology and improve product quality.

06/14/2020

Cold storage equipment installation and commissioning

Installation of refrigeration compressor unit in cold storage: The condensing unit should avoid installing in high temperature environment, and the outdoor awning should be installed to avoid rain or direct sunlight. The air inlet side of the air-cooled c器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬

08/20/2020

Common problems that should be paid attention to in the selection of cold storage forklifts

With the development of the Chinese economy and the increase in the urban population, the consumption level of the people continues to increase, and the demand for refrigerated food in the society is also showing explosive growth.

01/02/2025

FANUC Spindle Amplifier Alarm Codes and Solutions (3)

The following is a continuation of the previous article, and introduces FANUC spindle drive alarm codes 47-73.