Baumer Sensor IFRR 12N33T1/S14L-9

09/08/2020

Essential for air compressor companies safety monitoring implementation plan for special equipment

Special equipment refers to those equipment that is more dangerous and is prone to safety accidents if used or managed improperly. Special equipment is large in quantity and widely distributed, involving various aspects of production and life, and is an indispensable equipment facility that people have extensive contact with in daily work and life.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

07/27/2020

Ten reasons for the burning of air conditioning compressors

During the starting process of the air conditioner compressor, there is generally a step-down starting circuit, but the starting current will exceed several times the rated current, and the starting temperature of the air conditioner compressor motor will rise very quickly.

06/29/2020

What are the causes treatment and prevention methods of compressor liquid blow

What are the causes, treatment and prevention methods of compressor liquid blow Liquid blow means that the refrigerant liquid or wet steam is sucked into the compressor by the compressor due to failure or insufficient absorption of heat, which is called liquid blow. First, the main reasons are as follows:

06/14/2020

Top 3 Applications for a Servo Motor

Servo motors are essentially electric motors with inbuilt motor

08/20/2020

Introduction and characteristics of several throttling devices in refrigeration equipment

Among the four major components in the refrigeration system, the throttling device is one, and its function makes it have its own role.

07/27/2020

Cause analysis of common failures of compressors with heat transfer oil heating system

Cause analysis of common failures of compressors with heat transfer oil heating system<br></br>

09/11/2020

How to ensure the stable operation of imported bearings

Generally speaking, pay attention to the following points from the perspective of use: 1. The bearing clearance should be appropriate. If it is too large, it will cause impact, and if it is too small, it will cause poor lubrication and may burn bushes.

08/13/2020

Maintenance of automobile air conditioning control system

When troubleshooting and overhauling the automotive air-conditioning control electrical system, the specific failure phenomena should be observed and the possible failure locations should be analyzed to avoid blindness in overhaul.

08/16/2020

Several ways to remove mildew from cold storage, collect them!

Mold generally grows in dark and humid places and can adapt to lower temperatures. Usually in high temperature storage, the situation is the most serious. Mold grows in the cold storage, and the spores will fly everywhere,