NSK Linear Guideway LAH55ALZ-K

02/27/2025

Cooling Tower: Components, Working Principle, Types, Applications, and Precautions

A cooling tower is a device that uses the contact between water and air through the process of evaporation to dissipate waste heat generated in industrial or air conditioning systems.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/11/2020

Bearing and shaft fit tolerance standard

Bearing and shaft fit tolerance standard ①When the bearing inner diameter tolerance zone and the shaft tolerance zone form a fit, the tolerance code originally belonging to the transition fit in the general basic hole system will become an over-win fit, such as k5, k6, m5, m6, n6, etc., but the over-win amount is not Large; when the bearing inner diameter tolerance is matched with h5, h6, g5, g6, etc., it is not a clearance but an over-win fit.

08/31/2020

Compressed air quality standard verification in the international medical field

Compressed air and gas are vital to the operation of many medical facilities, and are usually used for breathing, sedation, and the operation of medical devices. Medical facilities must rely on these facilities to save lives and treat.

09/11/2020

How to ensure the stable operation of imported bearings

Generally speaking, pay attention to the following points from the perspective of use: 1. The bearing clearance should be appropriate. If it is too large, it will cause impact, and if it is too small, it will cause poor lubrication and may burn bushes.

08/31/2020

Discussion on the sales strategy of air compressor equipment

The characteristics of air compressor equipment sales are large unit product value, long customer transaction cycle, more variables in the transaction process, relatively rational customer decision-making,

09/06/2020

Selection and verification of pressure vessel safety accessories

1 Pressure vessel and its safety accessories 　　 Pressure vessel is a closed device, not only carries a certain pressure, but usually contains gas or liquid inside, and metal and non-metal materials are common. There is a large pressure difference between the inside and outside

08/16/2020

Factors influencing the evaporation capacity of air-cooled chiller evaporator

Whether it is an air-cooled chiller, an air-cooled screw chiller, or an air-cooled low-temperature chiller, an evaporator is needed. Today we are discussing: What is an evaporator? What are the factors that affect the evaporation capacity of an air-cooled chiller evaporator?

07/22/2024

Gas Shut-Off Solenoid Valve: Basics, Working Principles and Applications

Gas shut-off solenoid valves, also known as gas safety shut off solenoid valves and gas emergency shut off solenoid valves, are emergency shutoff devices for gas pipelines.

09/04/2020

How to improve enterprise safety management

Enterprise safety self-inspection is an important measure for enterprises to implement the main responsibility of safety, and it is also a skill that enterprises must master.