Rated Operational Voltage:
Main Circuit 208 ... 600 V AC
Rated Control Supply Voltage (Us): 100 ... 250 V AC Rated Control Circuit Voltage (Uc): DC Operation 24 V
Rated Frequency (f):
Main Circuit 50/60 Hz
Control Supply 50/60 Hz
Rated Operational Power - In-Line Connection (Pe):
(230 V) 4 kW
(400 V) 7.5 kW
(500 V) 11 kW
Rated Operational Current - In-Line Connection (Ie): 18 A
Service Factor Percentage: 100 %
Overload Protection: Build-in electronic overload protection
Integrated Electronic Overload: Yes
Adjustable Rated Motor Current Ie: 30 ... 100 %
Starting Capacity at Maximum Rated Current Ie: 4xIe for 10s
Ramp Time:
During Start 1 ... 30 second [unit of time]
During Stop 0 ... 30 second [unit of time]
Initial Voltage During Start: 30 ... 70 %
Step Down Voltage Special Ramp: No %
Current Limit Function: 1.5 ... 7xIe
Switch for Inside Delta Connection: No
Run Signal Relay: Yes
By-pass Signal Relay: Yes
Fault Signal Relay: Yes
Overload Signal Relay: Yes
Analog Outputs: 4...20 mA
Signal indication completed start ramp (LED):Green
Signal indication ready to start/standby ON (LED):Green
Signal indication running R (LED):Green
Signal indication ramping up/down (LED):Green
Signal indication protection (LED):Yellow
Signal indication fault (LED):Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: 10
Communication: FiledBusPlug(Optional)
Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
Terminal Type: Screw Terminals
Connecting Capacity Main Circuit: Rigid 1/2x2.5 ... 70 mm^2
Connecting Capacity Control Circuit:
Rigid 1x2.5 mm^2
Rigid 2x1.5 mm^2
Connecting Capacity Supply Circuit:
Rigid 1x2.5 mm^2
Rigid 2x1.5 mm^2
Tightening Torque:
Main Circuit 9 N.m
Supply Circuit 0.5 N.m
Control Circuit 0.5 N.m