AEG Contactor 3TF4122-1X

08/19/2020

What are the tips for purchasing a screw chiller for the first time

Screw chiller is named screw chiller because of its key component-the compressor adopts screw type. The state of the unit from the evaporator is gas refrigerant; after adiabatic compression by the compressor, it becomes a high temperature and high pressure state.

08/15/2020

Refrigeration methods and energy-saving methods of industrial refrigerators

Perhaps many friends are not very familiar with industrial refrigerators. In fact, this kind of equipment is aimed at refrigeration equipment in industrial production and can provide the most

09/03/2020

Selection of air inlet filter cartridge

The selection of the inlet filter cartridge actually involves many aspects, not only the cartridge itself, but also the entire system design. Therefore, when selecting a filter cartridge, you should refer to the processing air volume, surrounding environment, pre-filtration, etc.:

06/29/2020

How the compressor works

04/03/2025

Servo Motor vs. Stepper Motor: Unraveling the Differences and Choosing the Right Fit

In the realm of automation and precision control, the choice between servo motors and stepper motors plays a pivotal role in determining the efficiency and accuracy of various systems.

06/14/2020

Refrigeration compressor overheat failure analysis

Refrigeration compressor overheat failure analysis The main reasons for the exhaust temperature overheating are as follows: high return air temperature, large motor heating capacity, high compression ratio, high condensation pressure, and improper refrig器2䀀

08/15/2020

Several methods to detect the quality of refrigerator compressor

The compressor is the heart of the refrigerator refrigeration system, and its quality directly affects the performance of the refrigerator. Therefore, in the process of detecting the quality of the refrigerator

09/22/2020

Application of compressed air filter drier in mold manufacturing

Application of compressed air filter drier in mold manufacturing Conditions for manufacturing molds 1. Environmental conditions Temperature: During the whole process of manufacturing male and female molds, the same ambient temperature should always be maintained, that is, 21~28℃.

09/08/2020

What are the application areas of air compressors

In which industries are air compressors popular? As a general-purpose equipment in the new era, air compressors are inseparable from any gas demand. Below, let's take a look at the application areas of air compressors!

07/16/2020

Tips for compressors using refrigeration oil

The amount of frozen oil used. The amount of refrigerating oil should be controlled after the installation of the overall refrigeration system. After the trial operation, the oil return position of the refrigerating oil seen from the sight glass of the compressor should be at the center line of the sight glass.