AirTac Solenoid Valve 2KL32032B

09/08/2020

The necessity of air source system and its treatment

A system composed of equipment that generates, processes, and stores compressed air is called an air source system. A typical air source system consists of the following parts: air compressor, rear cooler, filter (including pre-filter, oil-water separator, pipeline filter, oil removal filter, deodorization filter, sterilization filter) Etc.),

02/27/2021

Debugging method of servo motor

Before wiring, initialize the parameters. On the control card: select the control method; clear the PID parameters; let the default enable signal turn off when the control card is powered on; save this state to ensure that the control card is in this state when it is powered on again.

06/29/2020

How the compressor works

09/09/2020

Principle of oil bath air filter

The filter is cylindrical, and the cylinder is divided into three parts: the outer cylinder, the inner cylinder, and the air outlet pipe. The upper part of the inner part is a swirling plate (or guide vane) and a filter screen, and the lower part is connected to the outer cylinder, and the bottom of the cylinder is filled with compressor oil (waste oil).

09/02/2020

164 technical questions and answers about pumps, just read this one!

1. What is a pump? Answer: The pump is a kind of machinery that converts the mechanical energy of the prime mover into pumping liquid energy.<br></br>

08/21/2020

Collection of various types of faults and troubleshooting methods for central air-conditioning!(Ⅰ)

Collection of various types of faults and troubleshooting methods for central air-conditioning! 1.Failure and maintenance methods of fan coil

08/14/2020

What are the performance advantages of air-cooled chillers

The rapid development of the refrigeration industry has brought a lot of convenience to people's lives, especially in the chemical and medical fields, and the demand for chillers in the food field is higher.

06/14/2020

Introduction of internal control elements of industrial chillers

Introduction of internal control elements of industrial chillers Chiller is a kind of water cooling equipment, which can provide constant temperature, constant current and constant pressure cooling water equipment. Its working principle is to inject a ceﰸ2

08/12/2020

Precautions for construction and operation of cold storage

1. Matters needing attention during cold storage installation<br></br> 　　 1. When installing a cold storage, in order to maintain a certain low temperature, a certain thickness of insulation material must be laid on the floor, walls and flat roof of the ¨ﰨ2䀀湠疨VǜV
㠠Ǒ㠠Ǒ㠠Ǒ類湠疨᾵疜筦

09/04/2020

Take a look at the compressor market research done by others! Have you found the gap

This is a summary of the market plan for the Xinjiang market. From this we can see that only by understanding the market and users can we make a good sale! Hope to have some inspiration for everyone to develop the market!