Allen Bradley PLC 1756-CN2RK

08/14/2020

What to pay attention to when building a chiller room

What should I pay attention to when building a chiller room? The machine room is to allow the chiller to have an independent and stable operating environment, avoid wind and sun, and various debris or dust to damage the unit

04/01/2024

Top 9 Robot Servo Motor Manufacturers Worldwide

The booming development of the industrial robot industry has also led to the development of related upstream industries.

09/03/2022

How to Maintain Circuit Breaker?

To make the circuit breaker to be in good conditions and prolong its service life, regular and proper maintenance is indispensable.

09/09/2020

Basic knowledge of gas compressor and its role in various fields

1.Compressor power and pressure: 1. The shaft power of the compressor is the sum of the indicated power and the friction power. The indicated power is the power directly consumed by compressed gas, the friction power is the power consumed by overcoming mechanical friction, and the shaft power of the compressor is the power used to select the drive motor.

08/17/2020

Five important points for attention when selecting piston chillers

The main control parameters of piston chillers are energy efficiency ratio, rated cooling capacity, input power, refrigerant type, power supply voltage, etc. Below, the editor of okmarts.com introduces the selection points of piston chillers in detail.

07/22/2020

Carrier screw compressor motor repair

Carrier screw compressor motor repair<br></br> <br></br> Performance characteristics<br></br> <br></br>  Use of chlorine-free refrigerant HFC-134a;<br></br> <br></br> 06N twin screw compressor achieves high full load efficiency;<br></br> <br></br>  Use flooded evaporator and condenser to enhance heat exchange efficiency;<br></br> <br></br>  Using electronic expansion valve, precise control;<br></br>

08/09/2020

Screw compressor structure

The screw compressor is composed of a pair of parallel and intermeshing female and male screws. It is the most widely used rotary compressor. There are two types of single screw and twin screw. Generally speaking, screw compressor refers to twin screw compressor.

07/08/2020

For cold storage to be more energy efficient, this should be done!

For cold storage to be more energy efficient, this should be done! 1. The index for reducing the unit heat flow of the cold storage enclosure structure. In the design of the cold storage, the unit heat flow q of the outer wall of the low-temperature cold storage is generally about 11.63W. If the q can be reduced to 6.9W, for a 5000T~10000T class In low-temperature cold storage, it is estimated that the power cost can be reduced by about 10%.

06/14/2020

Reciprocating compressor

Reciprocating compressor refrigerators The last one we want to see is reciprocating compressors. As newer and more efficient technologies have replaced it, this type of refrigerator is becoming less and less common, at least in the field of commercial ref器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧ߜ識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ琉

06/29/2020

Several causes of compressor burning