Autonics Rotary Encoder E40HB6-20-6-V-24

01/30/2022

3 Reasons for Using Pressure Transmitters in HVAC Systems

Transmitters play an indispensable role in most applications in HVAC (Heating, ventilation, and air conditioning) systems, which can maintain a suitable indoor temperature

11/24/2021

A Quick Look at HMI Touch Screen in Industrial Scenes

In modern society, mobile phone is almost a necessity for everyone. When your mobile phone is not around, you may easily feel anxious as if something is missing, which is called nomophobia.

07/26/2020

Common faults and troubleshooting methods of refrigeration compressors

The compressor is the "heart" of the refrigeration system. The compressor sucks low-temperature and low-pressure refrigerant gas from the suction pipe, drives the piston to compress it through the operation of the motor, and then discharges the high-temperature and high-pressure refrigerant gas to the exhaust pipe to provide power for the refrigeration cycle to realize the refrigeration cycle. The editor summarizes the common faults and troubleshooting methods of the compressor to help you better maintain the compressor.

08/12/2020

Four steps in the use of parallel compressors in cold storage

The use of parallel compressors focuses on four issues, as follows: 　　①Keep the oil level 　　② Countermeasures for liquid flood back 　　③Protection device and accessory parts device 　　④Confirmation of piping stress

08/15/2020

Failure Forms and Preventive Measures of Parts of Shell and Tube Heat Exchanger

1. The structure of the shell and tube heat exchanger<br></br> The shell and tube heat exchanger is a traditional and most widely used heat exchange equipment. Because it has a strong structure and can be made of a variety of materials

09/03/2022

How to Choose a Contactor?

In industrial electricity, the contactor uses an energized coil to generate a magnetic field to close the contacts to control the load.

08/19/2020

The importance of industrial chiller sealing and the hazards of entering air

During the use of industrial chillers, there are many factors that will cause the equipment to deteriorate. At this time, it is necessary for the enterprise to find the cause and solve it.

08/12/2020

Problems that should be paid attention to when selecting plate heat exchanger

1. Board type selection<br></br>　　 　　The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion.

06/29/2020

Several causes of compressor burning

09/14/2020

Smart vortex flowmeter

1. Function introduction: On-site LCD meter display, real-time temperature, real-time pressure, instantaneous flow, flow accumulation, temperature and pressure compensation function, when measuring gas and steam, check the meter according to the measured temperature and pressure to ensure compensation The flow rate is not affected by temperature and pressure changes,