Autonics Switch S2PRS-P3RUAD

06/24/2020

What's wrong with the freezer not cooling

There are four main reasons: the first is the lack of refrigerant and the compressor has problems; the second is the problem of the power cord of the freezer; the third is the frost in the evaporator of the freezer; the fourth is that the storage in the freezer is too full. Of course, no matter what the reason is, you should find a professional to help repair the loophole or add refrigerant.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

06/11/2024

Hydraulic Systems: Common Faults and Solutions

The hydraulic system is a high-precision, high-efficiency energy transmission system that is widely used in various mechanical equipment.

03/17/2021

Several effective tips for servo motor drive repair

1. When the Panasonic digital AC servo system is powered on, the motor vibrates and makes a lot of noise, and then the driver gives an alarm No. 16, what should I do?

07/13/2023

Troubleshooting Air Conditioning Compressor: A Comprehensive Guide

Air conditioning compressors are essential components of an air conditioning system, responsible for compressing refrigerant and circulating it through the system.

08/16/2020

How to effectively repair screw wear of screw refrigeration compressor

If you want to solve the problem effectively and quickly, you should first find out the cause of the problem, then let's first look at the cause of screw wear in the screw refrigeration compressor.

09/05/2020

What is a gas source system What are its components

A system composed of equipment that generates, processes, and stores compressed air is called an air source system. A typical air source system usually consists of the following parts: air compressor,

07/29/2020

R32 refrigerant training

Note: For products using R290 (such as dehumidifiers), if system failures are involved, automatic welding torch repairs are strictly prohibited. Please return the products to the factory according to the process.

09/11/2020

Comparison of ball bearings and roller bearings

Comparison of ball bearings and roller bearings From the point of view of the contact with the raceway: Ball bearings are in point contact, and the contact surface is ellipsoid; while roller bearings are in line contact, and when force is applied, the contact surface is square.

07/14/2020

Teach you 10 self-cooling drinks, do it whenever you want

1. First cut the oranges and lemons into small corners, this is not a big deal, just put it in a glass. 2. The orange and lemon corners are accumulated in the glass. There will be juice on one side and fragrance oil in the peel on the other side, so if you squeeze it under the mouth of the cup, the aroma will be much stronger.