Autonics Temperature Controller TK4H-A4CR

09/03/2022

How to Choose a Contactor?

In industrial electricity, the contactor uses an energized coil to generate a magnetic field to close the contacts to control the load.

08/20/2020

Evaporator fouling is harmful. Several common evaporator fouling measures must be

Evaporator and preheater fouling means that the concentrated salt wastewater contains a large amount of impurity salts, which form crystal nuclei after continuous evaporation and concentration.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/12/2020

Analysis of refrigeration equipment system operation and introduction of energy-saving measures

1. Economic analysis of refrigeration equipment system operation<br></br> The amount of cold produced by the refrigeration equipment is directly related to the operating conditions of the system.

08/12/2020

Reasons for the increase in condenser pressure in cold storage projects

The role of the cold storage is to ensure the quality of the stored items. With the country’s support for the construction of cold storage, cold storage projects have appeared in more places,

08/17/2020

The function and setting of the oil trap in the refrigeration system

In the Fuli Subaru refrigeration and air-conditioning system, when the main engine is higher than the end (evaporator), there is a riser pipe between the evaporator and the main suction pipe,

08/24/2020

The new standard of hygiene in the air-conditioning industry is here! Daikin Air Conditioning takes the lead in participating in the formulation

With the development of the new crown pneumonia epidemic, consumers are paying more and more attention to air-conditioning products with one or more functions such as fresh air, antibacterial, sterilization, purification, and disinfection.

08/03/2020

Compressor exhaust overheating is not that complicated, just for these few reasons!

The main reasons for the exhaust temperature overheating are as follows:<br></br> 　　 High return air temperature, large heating capacity of the motor, high compression ratio, high condensation pressure, improper refrigerant selection

09/03/2020

The advantages of the third eye of the air compressor are countless Take a look at remote monitoring.

As technology continues to improve and become more intelligent, manufacturing equipment can better monitor equipment performance and track regular maintenance through remote monitoring.

08/21/2020

How to operate the chiller correctly

For an operating chiller. Environmental conditions, the load has become a fixed value. At this time, the condensing heat load is also a fixed value. It is stipulated that the temperature difference between the inlet and outlet water is 5℃