Baumer Encoder EIL580-SC10.5BN.01024.A

09/07/2020

Application of pressure dew point in compressed air system

The air that is reduced in volume and increased in pressure by the mechanical movement of the air compressor is called compressed air. Compressed air is an important power source and is widely used in many industrial fields such as machinery, metallurgy, electronics, electric power,

08/08/2020

Daily maintenance method of precision air conditioner for computer room

With the development of science and technology, the precision air conditioners in the computer room are gradually upgraded, and the cost is getting higher and higher. Therefore, it is more necessary to increase maintenance efforts.

09/20/2020

Rolling bearing technology

Rolling bearing technology Rolling bearing temperature 　<br></br>　 The main factors of bearing operating temperature:

06/29/2020

Compression ratio of American Copeland compressor

08/11/2020

How to effectively reduce the noise of the fresh air system

During the installation and construction of the fresh air system, the fresh air system engineers often encounter that after the fresh air system is installed, the wind speed in the bedroom or study room is too high and the noise is too large

09/05/2020

What is the composition of the often said air compressor station

For air compressors, especially screw air compressors, they cannot be used directly. It is also necessary to establish an air compressor station with corresponding post-processing equipment.

08/07/2020

Knowledge points of HVAC cold and heat source design

1.The design position of the pump in the system: Generally speaking, the chilled water pump should be located at the front end of the chiller, and the chilled water coming back from the end is pumped back to the chiller through the chilled water pump;

08/10/2020

Adding method of refrigerant in central air conditioner

Adding method of refrigerant in central air conditioner<br></br> How to add refrigerant to the central air conditioner, what operating methods do you know? Let’s take a look with the editor today!

09/10/2020

The specific application of air compressors in various industries

1. Power industry Main uses: compressed air systems for instruments, compressed air systems for ash removal, and miscellaneous compressed air systems for factories. Water treatment includes boiler feed water treatment and industrial wastewater treatment systems. There will also be compressed air systems for equipment power in hydropower stations.

08/15/2020

Illustrate the working principle and characteristics of various heat exchangers

1. Heat exchanger<br></br> 1. U-shaped tube heat exchanger<br></br> Each tube is bent into a U shape and fixed on the same side tube plate. Each tube can be freely expanded and contracted, also in order to eliminate thermal stress.