Technical data - electrical ratings Voltage supply 10...30 VDC 5 VDC ±10 % (on request) Reverse polarity protection Yes (10..30 VDC) / No (5 VDC) Consumption w/o load ≤50 mA (24 VDC) ≤80 mA (5 VDC) Initializing time typ. 20 ms after power on Interface SSI Incremental A 90° B (optional) Function Singleturn Steps per revolution ≤524288 / 19 bit Absolute accuracy ±0.01 ° Sensing method Optical Code Gray or binary Code sequence CW/CCW coded by connection Inputs SSI clock Control signals UP/DOWN inv. and zero Output stages SSI data: Linedriver RS422 Diagnostic outputs push-pull Incremental output 2048 pulses A90°B + inverted Interference immunity EN 61000-6-2 Emitted interference EN 61000-6-4 Diagnostic function Self-diagnosis Approval UL approval / E63076 Technical data - mechanical design Size (flange) ø58 mm Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Flange Clamping or synchro flange Protection EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Starting torque ≤0.015 Nm (+25 °C, IP 54) ≤0.03 Nm (+25 °C, IP 65) Rotor moment of inertia 20 gcm² Admitted shaft load ≤20 N axial ≤40 N radial Material Housing: aluminium Flange: aluminium Operating temperature -25...+85 °C -40...+85 °C (optional) Relative humidity 95 % non-condensing Resistance EN 60068-2-6 Vibration ±0.75 mm - 10-58 Hz, 10 g - 58-2000 Hz EN 60068-2-27 Shock 200 g, 6 ms Weight approx. 400 g Connection Connector M23, 12-pin Connector M12, 8-pin Cable 1 m